RC4580IDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | RC4580 |
| Pin Count | 8 |
| Number of Elements | 2 |
| Power Supplies | +-15V |
| Operating Supply Current | 6mA |
| Nominal Supply Current | 4.5mA |
| Slew Rate | 5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Audio |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 100nA |
| Voltage - Supply, Single/Dual (±) | 4V~32V ±2V~16V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 12MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 12000 kHz |
| Voltage Gain | 110dB |
| Average Bias Current-Max (IIB) | 0.5μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 500μV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.5μA |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Nominal Gain Bandwidth Product | 12MHz |
| Max I/O Voltage | 3mV |
| Power | YES |
| Load Impedance | 2kOhm |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
RC4580IDR Overview
Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. An op amp of this type is a Audio-type. It comes in a Cut Tape (CT) case, which protects instrumentation amplifier from damage during delivery. The number of terminations approaches 8. Buffer amplifier has a total of 8 pins on it. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. This particular linear amplifier is a type of Operational Amplifier device, to be precise. In total, the buffer amplifier consists of 8 pins. In terms of the input offset voltage, instrumentation amplifier rates at 3mV. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . Operational amplifier can operate supply current at 6mA. Voltage gain should remain at 110dB. The op amp is rated for an operating supply voltage of 2. This linear amplifier pack is based on the TR axis.
RC4580IDR Features
8 Pins
supply voltage of 15V
110dB voltage gain
RC4580IDR Applications
There are a lot of Texas Instruments RC4580IDR Instrumentational OP Amps applications.
- Semiconductor detectors
- Proportional counter tubes
- Logarithmic operation circuits
- Scintillation detectors
- Multiplication circuits
- Hand-held batteries
- Fission chambers
- Subtraction operation circuits
- Portable docking station
- Vehicle electronics
