RC4580QPWRQ1
| Parameters | |
|---|---|
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 100nA |
| Voltage - Supply, Single/Dual (±) | 4V~32V ±2V~16V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 500μV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 12000 kHz |
| Voltage Gain | 110dB |
| Average Bias Current-Max (IIB) | 0.5μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.5μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 12MHz |
| Max I/O Voltage | 3mV |
| Wideband | NO |
| Power | YES |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Base Part Number | RC4580 |
| Pin Count | 8 |
| Power Supplies | +-15V |
| Number of Circuits | 2 |
| Operating Supply Current | 6mA |
| Slew Rate | 5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Audio |
RC4580QPWRQ1 Overview
In the package, you will find a 8-TSSOP (0.173, 4.40mm Width)-case to contain the op amp ic. An op amp of this type is a Audio-type. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. We are approaching the 8h termination of the year. In total, there are 8 pins on this op amp ic. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. In total, the buffer amplifier consists of 8 pins. With regard to input offset voltage, instrumentation amplifier is rated at 500μV. For this electrical component, Surface Mount is the recommended mounting type. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureYou can run this op amp ic on 6mA . 110dB should be the voltage gain. There are 2 circuits on op amps. The instrumentation amplifier is packed in the form of TR. In this case, Automotive, AEC-Q100 represents the instrumentation amplifiers' series number.
RC4580QPWRQ1 Features
8 Pins
supply voltage of 15V
110dB voltage gain
RC4580QPWRQ1 Applications
There are a lot of Texas Instruments RC4580QPWRQ1 Instrumentational OP Amps applications.
- Division circuits
- Video computer boards
- Oscilloscopes
- Laptop
- Image computer boards
- Instrumentation
- Medical imaging
- Weighing systems
- Multimedia playback equipment
- Portable docking station
