REG710NA-3/250
| Parameters | |
|---|---|
| Switcher Configuration | DOUBLER INVERTER |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Weight | 36.003894mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Analog ICs |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.95mm |
| Base Part Number | REG710 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 3V |
| Output Type | Fixed |
| Max Output Current | 30mA |
| Input Voltage-Nom | 2.25V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Analog IC - Other Type | SWITCHED CAPACITOR CONVERTER |
| Output Configuration | Positive |
| Quiescent Current | 65μA |
| Max Output Voltage | 3.18V |
| Voltage - Output (Min/Fixed) | 3V |
| Topology | Charge Pump |
| Frequency - Switching | 1MHz |
| Synchronous Rectifier | No |
| Min Output Voltage | 2.82V |
REG710NA-3/250 Overview
This harley voltage regulator utilizes the Cut Tape (CT) package for optimized performance. As you can see, this harley voltage regulator contains 6 terminations. There are two types of analog ICs on this voltage regulator. The first type is a SWITCHED CAPACITOR CONVERTER-type IC. For space-saving purposes, this voltage regulator is available in the SOT-23-6 package. The voltage regulator is configured with 1 outputs. This DC DC switching regulator generates Fixed output on its output pins. This switching regulator is designed to fit the Surface Mount mounting system. Operating at -40°C~85°C TA is the recommended temperature for adjusting voltage regulator's operation. 1MHz is the switching frequency of this DC-DC switching regulator. The output voltage of this voltage regulator (Min/Fixed) amounts to 3V volts. Its 260 peak reflow temperature makes this regulator essentially indestructible. Voltage regulator is designed to provide a nominal input voltage of 2.25V to meet the operation requirements. The regulator voltage is included in the Other Analog ICs subcategory of voltage regulators. There is a DC/DC regulator in this family that belongs to the REG710 family. The adjusting voltage regulator's output voltage is maintain at 3V. For switching regulator operation, 6 pins are used. This voltage regulator 12v should be configured with an output voltage that is at least 2.82V. The maximum output current reaches 30mA A to meet the switching regulator operation requirements. With a maximum output voltage of 3.18V, DC DC switching regulator has a very high efficiency. External factors do not affect voltage regulator's consumption of 65μA A of quiescent current. The dc to dc voltage regulator's minimum supply voltage of 1.8V volts ensures reliable performance. As long as the supply voltage is greater than 5.5V, the voltage regulator 12v will operate correctly.
REG710NA-3/250 Features
1 outputs
Peak reflow temperature (Cel) of 260
6 pins
REG710NA-3/250 Applications
There are a lot of Texas Instruments REG710NA-3/250 Voltage Regulators applications.
- USB circuits
- Access control systems
- Lathes
- Textile machinery
- Remotely powered electric motors
- Post equipment
- Automation technology
- Gear/thread machining machines
- Experimental setup
- Computer-related products
