REG711EA-5/2K5
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 25.996513mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Analog ICs |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | REG711 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5V |
| Output Type | Fixed |
| Max Output Current | 50mA |
| Input Voltage-Nom | 3.25V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Analog IC - Other Type | SWITCHED CAPACITOR REGULATOR |
| Output Configuration | Positive |
| Quiescent Current | 60μA |
| Max Output Voltage | 5.25V |
| Voltage - Output (Min/Fixed) | 5V |
| Topology | Charge Pump |
| Frequency - Switching | 1MHz |
| Synchronous Rectifier | No |
| Min Output Voltage | 4.75V |
| Switcher Configuration | DOUBLER INVERTER |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
REG711EA-5/2K5 Overview
As a result of the use of the Cut Tape (CT) package, the performance of this voltage regulator is optimized. A voltage regulator consists of 8 terminations. As this regulator voltage is equipped with an analog IC of the type SWITCHED CAPACITOR REGULATOR, it is a SWITCHED CAPACITOR REGULATOR-type voltage regulator. The space-saving 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package is available for this voltage regulator. A total of 1 outputs are configured in this voltage regulator. This DC DC switching regulator generates Fixed output on its output pins. The voltage regulator 12v fits the Surface Mount mounting hole. Voltage regulators should be operated at -40°C~85°C TA temperature while operating. Voltage regulator's switching frequency reaches 1MHz. According to the table below, DC DC switching regulator's output voltage (Min/Fixed) is equal to 5V. As a result of the 260 peak reflow temperature, this regulator is essentially indestructible. An input voltage of 3.25V is required to meet the requirements of the switching regulator operation. In terms of category, this voltage regulator 12v falls into the Other Analog ICs category. There is a DC/DC regulator in this family that belongs to the REG711 family. A voltage of 5V volts can be generated by DC DC switching regulator. To operate the voltage regulator 12v, 8 pins are required. The output voltage for this switching regulator should be kept at 4.75V at least. A 50mA A maximum output current is required to meet the switching regulator operation requirements. The maximum voltage of voltage regulator 12v DC DC switching regulator can produce is 5.25V, which is the highest available. Voltage regulator consumes 60μA A of quiescent current without being affected by external factors. The 2.7V V dc to dc voltage regulator's minimum supply voltage ensures reliable performance. There is a maximum supply voltage of 5.5V at which DC DC switching regulator can operate.
REG711EA-5/2K5 Features
1 outputs
Peak reflow temperature (Cel) of 260
8 pins
REG711EA-5/2K5 Applications
There are a lot of Texas Instruments REG711EA-5/2K5 Voltage Regulators applications.
- Electric water heaters
- Overvoltage protection circuits in TV sets
- Sensitive electronic devices
- Energy management systems
- Program control systems
- Shearing machines
- Large fire protection systems
- Medical monitoring systems
- Remotely powered electric motors
- Nuclear power plants
