RF80J271MDN1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Radial, Can |
| Operating Temperature | -55°C~105°C |
| Packaging | Bulk |
| Published | 2015 |
| Series | FPCAP, RF8 |
| Size / Dimension | 0.197Dia 5.00mm |
| Tolerance | ±20% |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 2 |
| Termination | Radial |
| ECCN Code | EAR99 |
| Type | Polymer |
| Terminal Finish | Tin (Sn) |
| Applications | General Purpose |
| HTS Code | 8532.22.00 |
| Capacitance | 270μF |
| Voltage - Rated DC | 6.3V |
| Terminal Pitch | 2mm |
| Lead Pitch | 2.0066mm |
| ESR (Equivalent Series Resistance) | 11mOhm |
| Polarity | Polar |
| Lead Spacing | 0.079 2.00mm |
| Lifetime @ Temp | 2000 Hrs @ 105°C |
| Leakage Current | 500μA |
| Ripple Current | 3.7A |
| Life (Hours) | 2000 hours |
| Ripple Current @ Low Frequency | 370mA @ 120Hz |
| Ripple Current @ High Frequency | 3.7A @ 100kHz |
| Dissipation Factor | 0.1 % |
| Diameter | 5mm |
| Height Seated (Max) | 0.354 9.00mm |
| Length | 8mm |
| RoHS Status | ROHS3 Compliant |
The capacitance can run at the range of 270μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Bulk packaging. It belongs to FPCAP, RF8 series. This part is mounted in the way of Through Hole. The type of the RF80J271MDN1 capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon RF80J271MDN1 is suitable to conduct the ripple current at 3.7A. RF80J271MDN1 Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 6.3V. There are 2 terminals embeded in RF80J271MDN1 Capacitor. There are 500μA to protect the current flowing from the ground conductor to ground. It has Radial terminations in total.
FPCAP, RF8 Series
Capacitance: 270μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Bulk
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of RF80J271MDN1 Aluminum Polymer Capacitors.
Typically, RF80J271MDN1 is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Power Factor Correction
- Smoothing Noise Filtering
- Flashtube Ignition
- DC Link
- Lighting Ballast
- DC Buffering
- To reduce power noise & signal noise
- Voltage Doubling
- Power Line Buffering
- Signal decoupling & power bypass
