RF80J331MDN1JT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | Radial, Can |
| Operating Temperature | -55°C~105°C |
| Packaging | Tape & Box (TB) |
| Published | 2015 |
| Series | FPCAP, RF8 |
| Size / Dimension | 0.197Dia 5.00mm |
| Tolerance | ±20% |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Termination | Radial |
| Type | Polymer |
| Applications | General Purpose |
| Capacitance | 330μF |
| Voltage - Rated DC | 6.3V |
| Lead Pitch | 2mm |
| ESR (Equivalent Series Resistance) | 11mOhm |
| Lead Spacing | 0.079 2.00mm |
| Lifetime @ Temp | 2000 Hrs @ 105°C |
| Leakage Current | 500μA |
| Ripple Current | 3.7A |
| Life (Hours) | 2000 hours |
| Ripple Current @ Low Frequency | 370mA @ 120Hz |
| Ripple Current @ High Frequency | 3.7A @ 100kHz |
| Diameter | 5mm |
| Height Seated (Max) | 0.354 9.00mm |
| RoHS Status | RoHS Compliant |
The capacitance can run at the range of 330μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Tape & Box (TB) packaging. It belongs to FPCAP, RF8 series. This part is mounted in the way of Through Hole. The type of the RF80J331MDN1JT capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon RF80J331MDN1JT is suitable to conduct the ripple current at 3.7A. RF80J331MDN1JT Capacitor The typical values of Voltage - Rated DC are 6.3V. RF80J331MDN1JT Capacitor. There are 500μA to protect the current flowing from the ground conductor to ground. It has Radial terminations in total.
FPCAP, RF8 Series
Capacitance: 330μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Tape & Box (TB)
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of RF80J331MDN1JT Aluminum Polymer Capacitors.
Typically, RF80J331MDN1JT is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Bypassing Noise Filtering
- Server motherboards
- Motor Start
- Flashtube Ignition
- Computer motherboards
- Coupling or blocking
- PFC
- UPS Buffering
- Spot Welding
- Signal decoupling & power bypass
