banner_page

RHS0E821MCN1GS

FPCAP, RHS Series 820μF 2.5V Aluminum Polymer Capacitors ±20% Radial, Can - SMD Surface Mount Tape & Reel (TR)


  • Manufacturer: Nichicon
  • Nocochips NO: 555-RHS0E821MCN1GS
  • Package: Radial, Can - SMD
  • Datasheet: PDF
  • Stock: 113
  • Description: FPCAP, RHS Series 820μF 2.5V Aluminum Polymer Capacitors ±20% Radial, Can - SMD Surface Mount Tape & Reel (TR) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case Radial, Can - SMD
Surface Mount Land Size 0.327Lx0.327W 8.30mmx8.30mm
Operating Temperature -55°C~105°C
Packaging Tape & Reel (TR)
Published 2009
Series FPCAP, RHS
Size / Dimension 0.315Dia 8.00mm
Tolerance ±20%
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Termination SMD/SMT
Type Polymer
Max Operating Temperature 105°C
Min Operating Temperature -55°C
Applications General Purpose
Voltage - Rated 2.5V
Capacitance 820μF
Voltage - Rated DC 2.5V
ESR (Equivalent Series Resistance) 9mOhm
Lifetime @ Temp 2000 Hrs @ 105°C
Leakage Current 700μA
Ripple Current 5.4A
Life (Hours) 2000 hours
Ripple Current @ Low Frequency 540mA @ 120Hz
Ripple Current @ High Frequency 5.4A @ 100kHz
Dissipation Factor 0.12 %
Diameter 8mm
Height 8.3mm
Height Seated (Max) 0.461 11.70mm
Length 11.7mm
Width 8.3mm
RoHS Status ROHS3 Compliant

The capacitance can run at the range of 820μF.


±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can - SMD. This capacitor is accessible in the Tape & Reel (TR) packaging. It belongs to FPCAP, RHS series. This part is mounted in the way of Surface Mount. The type of the RHS0E821MCN1GS capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon RHS0E821MCN1GS is suitable to conduct the ripple current at 5.4A. RHS0E821MCN1GS Capacitor is mounted by Surface Mount. The typical values of Voltage - Rated DC are 2.5V. RHS0E821MCN1GS Capacitor. There are 700μA to protect the current flowing from the ground conductor to ground. It has SMD/SMT terminations in total. Voltage - Rated often has values of 2.5V. This device's minimum working temperature must not be less than -55°C. It's recommended that you utilize it when the temperature is below 105°C.

FPCAP, RHS Series


Capacitance: 820μF
Tolerance: ±20%
Package / Case: Radial, Can - SMD
Packaging: Tape & Reel (TR)
Works Operating Temperature: -55°C~105°C

There are great quantities of applications of RHS0E821MCN1GS Aluminum Polymer Capacitors.


Typically, RHS0E821MCN1GS is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.

  • To enhance power efficiency
  • DC/DC, DC/AC, and AC/AC converters
  • PFC
  • Spot Welding
  • UPS Buffering
  • Coupling or blocking
  • Frequency Converters
  • Smoothing Noise Filtering
  • To reduce power noise & signal noise
  • Flashtube Ignition

Write a review

Note: HTML is not translated!
    Bad           Good