RHT1A221MDN1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Radial, Can |
| Dielectric Material | ALUMINUM |
| Operating Temperature | -55°C~125°C |
| Packaging | Bulk |
| Published | 2009 |
| Series | FPCAP, RHT |
| Size / Dimension | 0.315Dia 8.00mm |
| Tolerance | ±20% |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 2 |
| Termination | Radial |
| ECCN Code | EAR99 |
| Type | Polymer |
| Terminal Finish | Tin (Sn) |
| Applications | General Purpose |
| HTS Code | 8532.22.00 |
| Capacitance | 220μF |
| Voltage - Rated DC | 10V |
| Packing Method | Box |
| Terminal Pitch | 3.5mm |
| Lead Pitch | 3.5052mm |
| ESR (Equivalent Series Resistance) | 17mOhm |
| Polarity | Polar |
| Lead Spacing | 0.138 3.50mm |
| Lifetime @ Temp | 1000 Hrs @ 125°C |
| Leakage Current | 440μA |
| Ripple Current | 3.95A |
| Life (Hours) | 1000 hours |
| Ripple Current @ Low Frequency | 395mA @ 120Hz |
| Ripple Current @ High Frequency | 3.95A @ 100kHz |
| Dissipation Factor | 0.12 % |
| Diameter | 8mm |
| Height | 11.5mm |
| Height Seated (Max) | 0.453 11.50mm |
| RoHS Status | ROHS3 Compliant |
The capacitance can run at the range of 220μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Bulk packaging. It belongs to FPCAP, RHT series. This part is mounted in the way of Through Hole. The type of the RHT1A221MDN1 capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~125°C. Nichicon RHT1A221MDN1 is suitable to conduct the ripple current at 3.95A. RHT1A221MDN1 Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 10V. There are 2 terminals embeded in RHT1A221MDN1 Capacitor. There are 440μA to protect the current flowing from the ground conductor to ground. It has Radial terminations in total. The part is packaged by Box. The dielectric materials are defined as ALUMINUM.
FPCAP, RHT Series
Capacitance: 220μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Bulk
Works Operating Temperature: -55°C~125°C
There are great quantities of applications of RHT1A221MDN1 Aluminum Polymer Capacitors.
Typically, RHT1A221MDN1 is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Signal decoupling & power bypass
- DC Link
- PFC
- UPS Buffering
- Power Factor Correction
- To reduce power noise & signal noise
- Voltage Doubling
- Power Line Buffering
- Decoupling Noise Filtering
- DC/DC, DC/AC, and AC/AC converters
