RHT1C331MDN1PH
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Radial, Can |
| Terminal Shape | WIRE |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Box (TB) |
| Published | 2015 |
| Series | FPCAP, RHT |
| Size / Dimension | 0.394Dia 10.00mm |
| Tolerance | ±20% |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Type | Polymer |
| Terminal Finish | Matte Tin (Sn) |
| Applications | General Purpose |
| Voltage - Rated | 16V |
| HTS Code | 8532.22.00 |
| Capacitance | 330μF |
| Terminal Pitch | 5mm |
| Reach Compliance Code | unknown |
| Lead Pitch | 5.0038mm |
| ESR (Equivalent Series Resistance) | 16mOhm |
| Polarity | Polar |
| Lead Spacing | 0.197 5.00mm |
| Rated (DC) Voltage (URdc) | 16V |
| Lifetime @ Temp | 1000 Hrs @ 125°C |
| Leakage Current | 1.056mA |
| Ripple Current | 4.75A |
| Life (Hours) | 1000 hours |
| Tan Delta | 0.12 |
| Ripple Current @ Low Frequency | 475mA @ 120Hz |
| Ripple Current @ High Frequency | 4.75A @ 100kHz |
| Diameter | 10mm |
| Height Seated (Max) | 0.551 14.00mm |
| Length | 12.5mm |
| RoHS Status | ROHS3 Compliant |
The capacitance can run at the range of 330μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Tape & Box (TB) packaging. It belongs to FPCAP, RHT series. This part is mounted in the way of Through Hole. The type of the RHT1C331MDN1PH capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~125°C. Nichicon RHT1C331MDN1PH is suitable to conduct the ripple current at 4.75A. RHT1C331MDN1PH Capacitor is mounted by Through Hole. There are 2 terminals embeded in RHT1C331MDN1PH Capacitor. There are 1.056mA to protect the current flowing from the ground conductor to ground. Voltage - Rated often has values of 16V.
FPCAP, RHT Series
Capacitance: 330μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Tape & Box (TB)
Works Operating Temperature: -55°C~125°C
There are great quantities of applications of RHT1C331MDN1PH Aluminum Polymer Capacitors.
Typically, RHT1C331MDN1PH is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Power Factor Correction
- To reduce power noise & signal noise
- Motor Start
- Spot Welding
- DC Link
- DC/DC, DC/AC, and AC/AC converters
- To enhance power efficiency
- Motor Control
- Bypassing Noise Filtering
- Voltage Doubling
