RL80E152MDN1PX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Package / Case | Radial |
| Terminal Shape | WIRE |
| Dielectric Material | ALUMINUM (SOLID POLYMER) |
| Published | 2015 |
| Tolerance | 20% |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | -55°C |
| Voltage - Rated | 2.5V |
| HTS Code | 8532.22.00 |
| Capacitance | 1.5mF |
| Packing Method | TAPE |
| Terminal Pitch | 5mm |
| Lead Pitch | 3.5052mm |
| Capacitor Type | ALUMINUM ELECTROLYTIC CAPACITOR |
| ESR (Equivalent Series Resistance) | 7mOhm |
| Polarity | Polar |
| Leakage Current | 0.938mA |
| Ripple Current | 6.1A |
| Life (Hours) | 2000 hours |
| Tan Delta | 0.12 |
| Diameter | 8mm |
| Height Seated (Max) | 8.9916mm |
| Length | 8mm |
| RoHS Status | RoHS Compliant |
The capacitance can run at the range of 1.5mF.
20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial. The type of the RL80E152MDN1PX capacitor Nichicon RL80E152MDN1PX is suitable to conduct the ripple current at 6.1A. RL80E152MDN1PX Capacitor is mounted by Through Hole. There are 2 terminals embeded in RL80E152MDN1PX Capacitor. There are 0.938mA to protect the current flowing from the ground conductor to ground. Voltage - Rated often has values of 2.5V. The part is packaged by TAPE. The dielectric materials are defined as ALUMINUM (SOLID POLYMER). This device's minimum working temperature must not be less than -55°C. It's recommended that you utilize it when the temperature is below 105°C. The capacitor type can be sorted using ALUMINUM ELECTROLYTIC CAPACITOR.
Series
Capacitance: 1.5mF
Tolerance: 20%
Package / Case: Radial
There are great quantities of applications of RL80E152MDN1PX Aluminum Polymer Capacitors.
Typically, RL80E152MDN1PX is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- PFC
- To reduce power noise & signal noise
- DC Buffering
- Voltage Doubling
- Power Factor Correction
- Motor Start
- Computer motherboards
- Motor Control
- Power Line Buffering
- Flashtube Ignition
