RL80E561MDNASQPX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Package / Case | Radial |
| Dielectric Material | ALUMINUM (DRY/SOLID) |
| Published | 2013 |
| Tolerance | 20% |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | -55°C |
| Voltage - Rated | 2.5V |
| HTS Code | 8532.22.00 |
| Capacitance | 560μF |
| Packing Method | Tape |
| Terminal Pitch | 5mm |
| Lead Pitch | 3.5052mm |
| Capacitor Type | ALUMINUM ELECTROLYTIC CAPACITOR |
| ESR (Equivalent Series Resistance) | 6mOhm |
| Polarity | Polar |
| Ripple Current | 6.1A |
| Life (Hours) | 5000 hours |
| Diameter | 8mm |
| Height Seated (Max) | 8.9916mm |
| Length | 8mm |
| RoHS Status | RoHS Compliant |
The capacitance can run at the range of 560μF.
20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial. The type of the RL80E561MDNASQPX capacitor Nichicon RL80E561MDNASQPX is suitable to conduct the ripple current at 6.1A. RL80E561MDNASQPX Capacitor is mounted by Through Hole. There are 2 terminals embeded in RL80E561MDNASQPX Capacitor. Voltage - Rated often has values of 2.5V. The part is packaged by Tape. The dielectric materials are defined as ALUMINUM (DRY/SOLID). This device's minimum working temperature must not be less than -55°C. It's recommended that you utilize it when the temperature is below 105°C. The capacitor type can be sorted using ALUMINUM ELECTROLYTIC CAPACITOR.
Series
Capacitance: 560μF
Tolerance: 20%
Package / Case: Radial
There are great quantities of applications of RL80E561MDNASQPX Aluminum Polymer Capacitors.
Typically, RL80E561MDNASQPX is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- DC/DC, DC/AC, and AC/AC converters
- Voltage Doubling
- Frequency Converters
- Spot Welding
- Flashtube Ignition
- DC Buffering
- Motor Control
- Power Factor Correction
- Smoothing Noise Filtering
- Audio Crossover
