banner_page

RL80J471MDNASQ

FPCAP, RL8 Series 470μF 6.3V Aluminum Polymer Capacitors ±20% Radial, Can Through Hole Bulk


  • Manufacturer: Nichicon
  • Nocochips NO: 555-RL80J471MDNASQ
  • Package: Radial, Can
  • Datasheet: -
  • Stock: 343
  • Description: FPCAP, RL8 Series 470μF 6.3V Aluminum Polymer Capacitors ±20% Radial, Can Through Hole Bulk (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Through Hole
Mounting Type Through Hole
Package / Case Radial, Can
Dielectric Material ALUMINUM
Operating Temperature -55°C~105°C
Packaging Bulk
Published 2009
Series FPCAP, RL8
Size / Dimension 0.315Dia 8.00mm
Tolerance ±20%
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 2
Termination Radial
ECCN Code EAR99
Type Polymer
Terminal Finish Tin (Sn)
Applications General Purpose
HTS Code 8532.22.00
Capacitance 470μF
Voltage - Rated DC 6.3V
Packing Method Box
Lead Pitch 3.5mm
ESR (Equivalent Series Resistance) 8mOhm
Polarity Polar
Lead Spacing 0.138 3.50mm
Lead Diameter 600 μm
Voltage 6.3V
Lifetime @ Temp 5000 Hrs @ 105°C
Leakage Current 592.2μA
Ripple Current 5.7A
Life (Hours) 5000 hours
Ripple Current @ Low Frequency 570mA @ 120Hz
Ripple Current @ High Frequency 5.7A @ 100kHz
Dissipation Factor 0.12 %
Diameter 8mm
Height 8mm
Height Seated (Max) 0.354 9.00mm
RoHS Status ROHS3 Compliant

The capacitance can run at the range of 470μF.


±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Bulk packaging. It belongs to FPCAP, RL8 series. This part is mounted in the way of Through Hole. The type of the RL80J471MDNASQ capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon RL80J471MDNASQ is suitable to conduct the ripple current at 5.7A. RL80J471MDNASQ Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 6.3V. There are 2 terminals embeded in RL80J471MDNASQ Capacitor. There are 592.2μA to protect the current flowing from the ground conductor to ground. It has Radial terminations in total. The part is packaged by Box. The voltage for the part is specified as 6.3V volts. The dielectric materials are defined as ALUMINUM.

FPCAP, RL8 Series


Capacitance: 470μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Bulk
Works Operating Temperature: -55°C~105°C

There are great quantities of applications of RL80J471MDNASQ Aluminum Polymer Capacitors.


Typically, RL80J471MDNASQ is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.

  • DC Link
  • Power Factor Correction
  • Spot Welding
  • DC/DC, DC/AC, and AC/AC converters
  • Motor Control
  • Bypassing Noise Filtering
  • UPS Buffering
  • Signal decoupling & power bypass
  • Voltage Doubling
  • Coupling or blocking

Write a review

Note: HTML is not translated!
    Bad           Good