RL80J471MDNASQPX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Radial, Can |
| Dielectric Material | ALUMINUM (DRY/SOLID) |
| Operating Temperature | -55°C~105°C |
| Packaging | Tape & Box (TB) |
| Published | 2009 |
| Series | FPCAP, RL8 |
| Size / Dimension | 0.315Dia 8.00mm |
| Tolerance | ±20% |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 2 |
| Termination | Radial |
| ECCN Code | EAR99 |
| Type | Polymer |
| Terminal Finish | Tin (Sn) |
| Applications | General Purpose |
| HTS Code | 8532.22.00 |
| Capacitance | 470μF |
| Voltage - Rated DC | 6.3V |
| Lead Pitch | 3.5mm |
| ESR (Equivalent Series Resistance) | 8mOhm |
| Polarity | Polar |
| Lead Spacing | 0.138 3.50mm |
| Lead Diameter | 600 μm |
| Voltage | 6.3V |
| Lifetime @ Temp | 5000 Hrs @ 105°C |
| Leakage Current | 592.2μA |
| Ripple Current | 5.7A |
| Life (Hours) | 5000 hours |
| Ripple Current @ Low Frequency | 570mA @ 120Hz |
| Ripple Current @ High Frequency | 5.7A @ 100kHz |
| Dissipation Factor | 0.12 % |
| Diameter | 8mm |
| Height | 8mm |
| Height Seated (Max) | 0.354 9.00mm |
| RoHS Status | ROHS3 Compliant |
The capacitance can run at the range of 470μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Tape & Box (TB) packaging. It belongs to FPCAP, RL8 series. This part is mounted in the way of Through Hole. The type of the RL80J471MDNASQPX capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon RL80J471MDNASQPX is suitable to conduct the ripple current at 5.7A. RL80J471MDNASQPX Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 6.3V. There are 2 terminals embeded in RL80J471MDNASQPX Capacitor. There are 592.2μA to protect the current flowing from the ground conductor to ground. It has Radial terminations in total. The voltage for the part is specified as 6.3V volts. The dielectric materials are defined as ALUMINUM (DRY/SOLID).
FPCAP, RL8 Series
Capacitance: 470μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Tape & Box (TB)
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of RL80J471MDNASQPX Aluminum Polymer Capacitors.
Typically, RL80J471MDNASQPX is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Voltage Doubling
- Signal decoupling & power bypass
- Flashtube Ignition
- Spot Welding
- Decoupling Noise Filtering
- PFC
- Motor Control
- UPS Buffering
- Frequency Converters
- To enhance power efficiency
