RL80J821MDN1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Radial, Can |
| Dielectric Material | ALUMINUM |
| Operating Temperature | -55°C~105°C |
| Packaging | Bulk |
| Published | 2015 |
| Series | FPCAP, RL8 |
| Size / Dimension | 0.315Dia 8.00mm |
| Tolerance | ±20% |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 2 |
| Termination | Radial |
| ECCN Code | EAR99 |
| Type | Polymer |
| Terminal Finish | Tin (Sn) |
| Applications | General Purpose |
| HTS Code | 8532.22.00 |
| Capacitance | 820μF |
| Voltage - Rated DC | 6.3V |
| Packing Method | Box |
| Terminal Pitch | 3.5mm |
| Lead Pitch | 3.5052mm |
| ESR (Equivalent Series Resistance) | 8mOhm |
| Polarity | Polar |
| Lead Spacing | 0.138 3.50mm |
| Lifetime @ Temp | 2000 Hrs @ 105°C |
| Leakage Current | 1.0332mA |
| Ripple Current | 5.7A |
| Life (Hours) | 2000 hours |
| Ripple Current @ Low Frequency | 570mA @ 120Hz |
| Ripple Current @ High Frequency | 5.7A @ 100kHz |
| Dissipation Factor | 0.12 % |
| Diameter | 8mm |
| Height Seated (Max) | 0.354 9.00mm |
| Length | 8mm |
| RoHS Status | ROHS3 Compliant |
The capacitance can run at the range of 820μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Bulk packaging. It belongs to FPCAP, RL8 series. This part is mounted in the way of Through Hole. The type of the RL80J821MDN1 capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon RL80J821MDN1 is suitable to conduct the ripple current at 5.7A. RL80J821MDN1 Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 6.3V. There are 2 terminals embeded in RL80J821MDN1 Capacitor. There are 1.0332mA to protect the current flowing from the ground conductor to ground. It has Radial terminations in total. The part is packaged by Box. The dielectric materials are defined as ALUMINUM.
FPCAP, RL8 Series
Capacitance: 820μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Bulk
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of RL80J821MDN1 Aluminum Polymer Capacitors.
Typically, RL80J821MDN1 is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Coupling or blocking
- Power Line Buffering
- DC Link
- Decoupling Noise Filtering
- To reduce power noise & signal noise
- Power Factor Correction
- Motor Start
- PFC
- Signal decoupling & power bypass
- To enhance power efficiency
