RL81C101MDN1PX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | Radial, Can |
| Dielectric Material | ALUMINUM (DRY/SOLID) |
| Operating Temperature | -55°C~105°C |
| Packaging | Tape & Reel (TR) |
| Series | FPCAP, RL8 |
| Size / Dimension | 0.315Dia 8.00mm |
| Tolerance | ±20% |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Type | Polymer |
| Terminal Finish | Tin (Sn) |
| Applications | General Purpose |
| Voltage - Rated | 16V |
| HTS Code | 8532.22.00 |
| Capacitance | 100μF |
| Terminal Pitch | 5mm |
| Reach Compliance Code | compliant |
| ESR (Equivalent Series Resistance) | 12mOhm |
| Polarity | POLARIZED |
| Lead Spacing | 0.138 3.50mm |
| Rated (DC) Voltage (URdc) | 16V |
| Lifetime @ Temp | 2000 Hrs @ 105°C |
| Ripple Current @ Low Frequency | 500mA @ 120Hz |
| Ripple Current @ High Frequency | 5A @ 100kHz |
| Diameter | 8mm |
| Height Seated (Max) | 0.354 9.00mm |
| Length | 8mm |
| RoHS Status | RoHS Compliant |
The capacitance can run at the range of 100μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Tape & Reel (TR) packaging. It belongs to FPCAP, RL8 series. This part is mounted in the way of Through Hole. The type of the RL81C101MDN1PX capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon RL81C101MDN1PX RL81C101MDN1PX Capacitor There are 2 terminals embeded in RL81C101MDN1PX Capacitor. Voltage - Rated often has values of 16V. The dielectric materials are defined as ALUMINUM (DRY/SOLID).
FPCAP, RL8 Series
Capacitance: 100μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Tape & Reel (TR)
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of RL81C101MDN1PX Aluminum Polymer Capacitors.
Typically, RL81C101MDN1PX is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- To reduce power noise & signal noise
- Bypassing Noise Filtering
- Lighting Ballast
- Motor Start
- Smoothing Noise Filtering
- DC/DC, DC/AC, and AC/AC converters
- Frequency Converters
- Power Factor Correction
- PFC
- DC Link
