Parameters |
Factory Lead Time |
1 Week |
Mount |
PCB, Through Hole |
Package / Case |
Radial |
Terminal Shape |
WIRE |
Dielectric Material |
ALUMINUM (SOLID POLYMER) |
Published |
2009 |
Tolerance |
20% |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Number of Terminations |
2 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Max Operating Temperature |
105°C |
Min Operating Temperature |
-55°C |
HTS Code |
8532.22.00 |
Capacitance |
270μF |
Voltage - Rated DC |
16V |
Packing Method |
TAPE |
Lead Pitch |
3.5mm |
Capacitor Type |
ALUMINUM ELECTROLYTIC CAPACITOR |
ESR (Equivalent Series Resistance) |
10mOhm |
Polarity |
Polar |
Lead Diameter |
600 μm |
Voltage |
16V |
Ripple Current |
5A |
Life (Hours) |
2000 hours |
Dissipation Factor |
0.12 % |
Current - Leakage |
864μA |
Diameter |
8mm |
Height |
8mm |
Height Seated (Max) |
8.9916mm |
Length |
8mm |
RoHS Status |
RoHS Compliant |
The capacitance can run at the range of 270μF.
20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial. The type of the RL81C271MDN1PX capacitor Nichicon RL81C271MDN1PX is suitable to conduct the ripple current at 5A. RL81C271MDN1PX Capacitor is mounted by PCB, Through Hole. The typical values of Voltage - Rated DC are 16V. There are 2 terminals embeded in RL81C271MDN1PX Capacitor. The part is packaged by TAPE. The voltage for the part is specified as 16V volts. The dielectric materials are defined as ALUMINUM (SOLID POLYMER). This device's minimum working temperature must not be less than -55°C. It's recommended that you utilize it when the temperature is below 105°C. The capacitor type can be sorted using ALUMINUM ELECTROLYTIC CAPACITOR.
Series
Capacitance: 270μF
Tolerance: 20%
Package / Case: Radial
There are great quantities of applications of RL81C271MDN1PX Aluminum Polymer Capacitors.
Typically, RL81C271MDN1PX is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Power Factor Correction
- Motor Control
- Audio Crossover
- Voltage Doubling
- Lighting Ballast
- Smoothing Noise Filtering
- Frequency Converters
- To reduce power noise & signal noise
- Signal decoupling & power bypass
- Spot Welding