RNS0J102MDN1PH
| Parameters | |
|---|---|
| Life (Hours) | 2000 hours |
| Ripple Current @ Low Frequency | 550mA @ 120Hz |
| Ripple Current @ High Frequency | 5.5A @ 100kHz |
| Dissipation Factor | 0.12 % |
| Diameter | 10mm |
| Height | 12.5mm |
| Height Seated (Max) | 0.551 14.00mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Radial, Can |
| Terminal Shape | WIRE |
| Operating Temperature | -55°C~105°C |
| Packaging | Tape & Box (TB) |
| Published | 2009 |
| Series | FPCAP, RNS |
| Size / Dimension | 0.394Dia 10.00mm |
| Tolerance | ±20% |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 2 |
| Termination | Radial |
| ECCN Code | EAR99 |
| Type | Polymer |
| Terminal Finish | Tin (Sn) |
| Applications | General Purpose |
| HTS Code | 8532.22.00 |
| Capacitance | 1000μF |
| Voltage - Rated DC | 6.3V |
| Lead Pitch | 5mm |
| ESR (Equivalent Series Resistance) | 10mOhm |
| Polarity | Polar |
| Lead Spacing | 0.197 5.00mm |
| Multilayer | No |
| Lead Diameter | 600 μm |
| Voltage | 6.3V |
| Lifetime @ Temp | 2000 Hrs @ 105°C |
| Leakage Current | 945μA |
| Ripple Current | 5.5A |
The capacitance can run at the range of 1000μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Tape & Box (TB) packaging. It belongs to FPCAP, RNS series. This part is mounted in the way of Through Hole. The type of the RNS0J102MDN1PH capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon RNS0J102MDN1PH is suitable to conduct the ripple current at 5.5A. RNS0J102MDN1PH Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 6.3V. There are 2 terminals embeded in RNS0J102MDN1PH Capacitor. There are 945μA to protect the current flowing from the ground conductor to ground. It has Radial terminations in total. The voltage for the part is specified as 6.3V volts.
FPCAP, RNS Series
Capacitance: 1000μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Tape & Box (TB)
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of RNS0J102MDN1PH Aluminum Polymer Capacitors.
Typically, RNS0J102MDN1PH is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Computer motherboards
- Bypassing Noise Filtering
- DC Link
- Voltage Doubling
- Server motherboards
- Lighting Ballast
- PFC
- Motor Control
- Audio Crossover
- Motor Start
