RNS0J681MDN1PH
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Radial, Can |
| Terminal Shape | WIRE |
| Operating Temperature | -55°C~105°C |
| Packaging | Cut Tape (CT) |
| Published | 2009 |
| Series | FPCAP, RNS |
| Size / Dimension | 0.394Dia 10.00mm |
| Tolerance | ±20% |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 2 |
| Termination | Radial |
| ECCN Code | EAR99 |
| Type | Polymer |
| Terminal Finish | Tin (Sn) |
| Applications | General Purpose |
| HTS Code | 8532.22.00 |
| Capacitance | 680μF |
| Voltage - Rated DC | 6.3V |
| Lead Pitch | 5.0038mm |
| ESR (Equivalent Series Resistance) | 10mOhm |
| Polarity | POLARIZED |
| Lead Spacing | 0.197 5.00mm |
| Multilayer | No |
| Lead Diameter | 600 μm |
| Voltage | 6.3V |
| Lifetime @ Temp | 2000 Hrs @ 105°C |
| Leakage Current | 642.6μA |
| Ripple Current | 5.5A |
| Life (Hours) | 2000 hours |
| Ripple Current @ Low Frequency | 550mA @ 120Hz |
| Ripple Current @ High Frequency | 5.5A @ 100kHz |
| Dissipation Factor | 0.08 % |
| Diameter | 10mm |
| Height | 12.5mm |
| Height Seated (Max) | 0.551 14.00mm |
| RoHS Status | ROHS3 Compliant |
The capacitance can run at the range of 680μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Cut Tape (CT) packaging. It belongs to FPCAP, RNS series. This part is mounted in the way of Through Hole. The type of the RNS0J681MDN1PH capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon RNS0J681MDN1PH is suitable to conduct the ripple current at 5.5A. RNS0J681MDN1PH Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 6.3V. There are 2 terminals embeded in RNS0J681MDN1PH Capacitor. There are 642.6μA to protect the current flowing from the ground conductor to ground. It has Radial terminations in total. The voltage for the part is specified as 6.3V volts.
FPCAP, RNS Series
Capacitance: 680μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Cut Tape (CT)
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of RNS0J681MDN1PH Aluminum Polymer Capacitors.
Typically, RNS0J681MDN1PH is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Voltage Doubling
- To reduce power noise & signal noise
- Computer motherboards
- Audio Crossover
- Frequency Converters
- DC Link
- Motor Start
- Coupling or blocking
- To enhance power efficiency
- Motor Control
