RNS1C101MDN1PX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Package / Case | Radial |
| Terminal Shape | WIRE |
| Dielectric Material | ALUMINUM (SOLID POLYMER) |
| Published | 2015 |
| Tolerance | 20% |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | -55°C |
| Voltage - Rated | 16V |
| HTS Code | 8532.22.00 |
| Capacitance | 100μF |
| Packing Method | TAPE |
| Terminal Pitch | 3.5mm |
| Lead Pitch | 3.5052mm |
| Capacitor Type | ALUMINUM ELECTROLYTIC CAPACITOR |
| ESR (Equivalent Series Resistance) | 21mOhm |
| Polarity | Polar |
| Leakage Current | 0.24mA |
| Ripple Current | 3.9A |
| Life (Hours) | 2000 hours |
| Tan Delta | 0.06 |
| Height Seated (Max) | 13.0048mm |
| RoHS Status | RoHS Compliant |
The capacitance can run at the range of 100μF.
20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial. The type of the RNS1C101MDN1PX capacitor Nichicon RNS1C101MDN1PX is suitable to conduct the ripple current at 3.9A. RNS1C101MDN1PX Capacitor is mounted by Through Hole. There are 2 terminals embeded in RNS1C101MDN1PX Capacitor. There are 0.24mA to protect the current flowing from the ground conductor to ground. Voltage - Rated often has values of 16V. The part is packaged by TAPE. The dielectric materials are defined as ALUMINUM (SOLID POLYMER). This device's minimum working temperature must not be less than -55°C. It's recommended that you utilize it when the temperature is below 105°C. The capacitor type can be sorted using ALUMINUM ELECTROLYTIC CAPACITOR.
Series
Capacitance: 100μF
Tolerance: 20%
Package / Case: Radial
There are great quantities of applications of RNS1C101MDN1PX Aluminum Polymer Capacitors.
Typically, RNS1C101MDN1PX is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Motor Start
- Power Factor Correction
- Spot Welding
- Computer motherboards
- Signal decoupling & power bypass
- Bypassing Noise Filtering
- To reduce power noise & signal noise
- Flashtube Ignition
- Motor Control
- Coupling or blocking
