RNS1C181MDN1KX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Radial, Can |
| Terminal Shape | WIRE |
| Operating Temperature | -55°C~105°C |
| Packaging | Cut Tape (CT) |
| Published | 2009 |
| Series | FPCAP, RNS |
| Size / Dimension | 0.315Dia 8.00mm |
| Tolerance | ±20% |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 2 |
| Termination | Radial |
| ECCN Code | EAR99 |
| Type | Polymer |
| Terminal Finish | Tin (Sn) |
| Applications | General Purpose |
| HTS Code | 8532.22.00 |
| Capacitance | 180μF |
| Voltage - Rated DC | 16V |
| Lead Pitch | 3.5mm |
| ESR (Equivalent Series Resistance) | 16mOhm |
| Polarity | POLARIZED |
| Lead Spacing | 0.138 3.50mm |
| Lead Diameter | 600 μm |
| Voltage | 16V |
| Lifetime @ Temp | 2000 Hrs @ 105°C |
| Leakage Current | 432μA |
| Ripple Current | 4.7A |
| Life (Hours) | 2000 hours |
| Ripple Current @ Low Frequency | 470mA @ 120Hz |
| Ripple Current @ High Frequency | 4.7A @ 100kHz |
| Dissipation Factor | 0.08 % |
| Diameter | 8mm |
| Height | 11.5mm |
| Height Seated (Max) | 0.512 13.00mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
The capacitance can run at the range of 180μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Cut Tape (CT) packaging. It belongs to FPCAP, RNS series. This part is mounted in the way of Through Hole. The type of the RNS1C181MDN1KX capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon RNS1C181MDN1KX is suitable to conduct the ripple current at 4.7A. RNS1C181MDN1KX Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 16V. There are 2 terminals embeded in RNS1C181MDN1KX Capacitor. There are 432μA to protect the current flowing from the ground conductor to ground. It has Radial terminations in total. The voltage for the part is specified as 16V volts.
FPCAP, RNS Series
Capacitance: 180μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Cut Tape (CT)
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of RNS1C181MDN1KX Aluminum Polymer Capacitors.
Typically, RNS1C181MDN1KX is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Bypassing Noise Filtering
- UPS Buffering
- To reduce power noise & signal noise
- Motor Control
- Signal decoupling & power bypass
- Power Line Buffering
- Computer motherboards
- Decoupling Noise Filtering
- Spot Welding
- Smoothing Noise Filtering
