banner_page

RNS1C470MDS1

FPCAP, RNS Series 47μF 16V Aluminum Polymer Capacitors ±20% Radial, Can Through Hole Bulk


  • Manufacturer: Nichicon
  • Nocochips NO: 555-RNS1C470MDS1
  • Package: Radial, Can
  • Datasheet: -
  • Stock: 695
  • Description: FPCAP, RNS Series 47μF 16V Aluminum Polymer Capacitors ±20% Radial, Can Through Hole Bulk (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Through Hole
Mounting Type Through Hole
Package / Case Radial, Can
Dielectric Material ALUMINUM (DRY/SOLID)
Operating Temperature -55°C~105°C
Packaging Bulk
Published 2015
Series FPCAP, RNS
Size / Dimension 0.248Dia 6.30mm
Tolerance ±20%
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 2
Termination Radial
ECCN Code EAR99
Type Polymer
Terminal Finish Tin (Sn)
Applications General Purpose
HTS Code 8532.22.00
Capacitance 47μF
Voltage - Rated DC 16V
Packing Method Box
Terminal Pitch 2.5mm
Lead Pitch 2.4892mm
ESR (Equivalent Series Resistance) 42mOhm
Polarity Polar
Lead Spacing 0.098 2.50mm
Lifetime @ Temp 2000 Hrs @ 105°C
Leakage Current 112.8μA
Ripple Current 2.4A
Life (Hours) 2000 hours
Ripple Current @ Low Frequency 240mA @ 120Hz
Ripple Current @ High Frequency 2.4A @ 100kHz
Dissipation Factor 0.06 %
Diameter 6.3mm
Height Seated (Max) 0.433 11.00mm
Length 10mm
RoHS Status ROHS3 Compliant

The capacitance can run at the range of 47μF.


±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Bulk packaging. It belongs to FPCAP, RNS series. This part is mounted in the way of Through Hole. The type of the RNS1C470MDS1 capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon RNS1C470MDS1 is suitable to conduct the ripple current at 2.4A. RNS1C470MDS1 Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 16V. There are 2 terminals embeded in RNS1C470MDS1 Capacitor. There are 112.8μA to protect the current flowing from the ground conductor to ground. It has Radial terminations in total. The part is packaged by Box. The dielectric materials are defined as ALUMINUM (DRY/SOLID).

FPCAP, RNS Series


Capacitance: 47μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Bulk
Works Operating Temperature: -55°C~105°C

There are great quantities of applications of RNS1C470MDS1 Aluminum Polymer Capacitors.


Typically, RNS1C470MDS1 is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.

  • Flashtube Ignition
  • Decoupling Noise Filtering
  • Audio Crossover
  • Server motherboards
  • DC/DC, DC/AC, and AC/AC converters
  • Motor Control
  • Voltage Doubling
  • Frequency Converters
  • UPS Buffering
  • DC Buffering

Write a review

Note: HTML is not translated!
    Bad           Good