RNS1D150MDS1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Radial, Can |
| Dielectric Material | ALUMINUM |
| Operating Temperature | -55°C~105°C |
| Packaging | Bulk |
| Published | 2015 |
| Series | FPCAP, RNS |
| Size / Dimension | 0.248Dia 6.30mm |
| Tolerance | ±20% |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 2 |
| Termination | Radial |
| ECCN Code | EAR99 |
| Type | Polymer |
| Terminal Finish | Tin (Sn) |
| Applications | General Purpose |
| HTS Code | 8532.22.00 |
| Capacitance | 15μF |
| Voltage - Rated DC | 20V |
| Packing Method | Box |
| Terminal Pitch | 2.5mm |
| Lead Pitch | 2.4892mm |
| ESR (Equivalent Series Resistance) | 63mOhm |
| Polarity | Polar |
| Lead Spacing | 0.098 2.50mm |
| Lifetime @ Temp | 2000 Hrs @ 105°C |
| Leakage Current | 50μA |
| Ripple Current | 1.7A |
| Life (Hours) | 2000 hours |
| Ripple Current @ Low Frequency | 170mA @ 120Hz |
| Ripple Current @ High Frequency | 1.7A @ 100kHz |
| Dissipation Factor | 0.06 % |
| Diameter | 6.3mm |
| Height Seated (Max) | 0.315 8.00mm |
| Length | 7mm |
| RoHS Status | ROHS3 Compliant |
The capacitance can run at the range of 15μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Bulk packaging. It belongs to FPCAP, RNS series. This part is mounted in the way of Through Hole. The type of the RNS1D150MDS1 capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon RNS1D150MDS1 is suitable to conduct the ripple current at 1.7A. RNS1D150MDS1 Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 20V. There are 2 terminals embeded in RNS1D150MDS1 Capacitor. There are 50μA to protect the current flowing from the ground conductor to ground. It has Radial terminations in total. The part is packaged by Box. The dielectric materials are defined as ALUMINUM.
FPCAP, RNS Series
Capacitance: 15μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Bulk
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of RNS1D150MDS1 Aluminum Polymer Capacitors.
Typically, RNS1D150MDS1 is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- To enhance power efficiency
- Coupling or blocking
- To reduce power noise & signal noise
- Power Line Buffering
- DC/DC, DC/AC, and AC/AC converters
- Bypassing Noise Filtering
- Motor Start
- Smoothing Noise Filtering
- Lighting Ballast
- Flashtube Ignition
