RNS1E100MDS1JT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Radial, Can |
| Terminal Shape | WIRE |
| Operating Temperature | -55°C~105°C |
| Packaging | Tape & Box (TB) |
| Published | 2015 |
| Series | FPCAP, RNS |
| Size / Dimension | 0.248Dia 6.30mm |
| Tolerance | ±20% |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 2 |
| Termination | Radial |
| ECCN Code | EAR99 |
| Type | Polymer |
| Terminal Finish | Tin (Sn) |
| Applications | General Purpose |
| HTS Code | 8532.22.00 |
| Capacitance | 10μF |
| Voltage - Rated DC | 25V |
| Lead Pitch | 2.5mm |
| ESR (Equivalent Series Resistance) | 63mOhm |
| Polarity | Polar |
| Lead Spacing | 0.098 2.50mm |
| Lead Diameter | 450 μm |
| Voltage | 25V |
| Lifetime @ Temp | 2000 Hrs @ 105°C |
| Leakage Current | 50μA |
| Ripple Current | 1.7A |
| Life (Hours) | 2000 hours |
| Ripple Current @ Low Frequency | 170mA @ 120Hz |
| Ripple Current @ High Frequency | 1.7A @ 100kHz |
| Dissipation Factor | 0.06 % |
| Diameter | 6.3mm |
| Height | 7mm |
| Height Seated (Max) | 0.315 8.00mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
The capacitance can run at the range of 10μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Tape & Box (TB) packaging. It belongs to FPCAP, RNS series. This part is mounted in the way of Through Hole. The type of the RNS1E100MDS1JT capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon RNS1E100MDS1JT is suitable to conduct the ripple current at 1.7A. RNS1E100MDS1JT Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 25V. There are 2 terminals embeded in RNS1E100MDS1JT Capacitor. There are 50μA to protect the current flowing from the ground conductor to ground. It has Radial terminations in total. The voltage for the part is specified as 25V volts.
FPCAP, RNS Series
Capacitance: 10μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Tape & Box (TB)
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of RNS1E100MDS1JT Aluminum Polymer Capacitors.
Typically, RNS1E100MDS1JT is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- PFC
- Bypassing Noise Filtering
- Spot Welding
- Computer motherboards
- To reduce power noise & signal noise
- Lighting Ballast
- Motor Start
- Server motherboards
- Audio Crossover
- Signal decoupling & power bypass
