RNS1E101MDN1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | Radial, Can |
| Dielectric Material | ALUMINUM (DRY/SOLID) |
| Operating Temperature | -55°C~105°C |
| Packaging | Bulk |
| Series | FPCAP, RNS |
| Size / Dimension | 0.394Dia 10.00mm |
| Tolerance | ±20% |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 2 |
| Termination | Radial |
| ECCN Code | EAR99 |
| Type | Polymer |
| Terminal Finish | Tin (Sn) |
| Applications | General Purpose |
| HTS Code | 8532.22.00 |
| Capacitance | 100μF |
| Voltage - Rated DC | 25V |
| Lead Pitch | 5mm |
| ESR (Equivalent Series Resistance) | 15mOhm |
| Lead Spacing | 0.197 5.00mm |
| Lifetime @ Temp | 2000 Hrs @ 105°C |
| Leakage Current | 500μA |
| Ripple Current | 4.5A |
| Life (Hours) | 2000 hours |
| Ripple Current @ Low Frequency | 450mA @ 120Hz |
| Ripple Current @ High Frequency | 4.5A @ 100kHz |
| Dissipation Factor | 0.08 % |
| Diameter | 10mm |
| Height Seated (Max) | 0.551 14.00mm |
| RoHS Status | RoHS Compliant |
The capacitance can run at the range of 100μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Bulk packaging. It belongs to FPCAP, RNS series. This part is mounted in the way of Through Hole. The type of the RNS1E101MDN1 capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon RNS1E101MDN1 is suitable to conduct the ripple current at 4.5A. RNS1E101MDN1 Capacitor The typical values of Voltage - Rated DC are 25V. There are 2 terminals embeded in RNS1E101MDN1 Capacitor. There are 500μA to protect the current flowing from the ground conductor to ground. It has Radial terminations in total. The dielectric materials are defined as ALUMINUM (DRY/SOLID).
FPCAP, RNS Series
Capacitance: 100μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Bulk
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of RNS1E101MDN1 Aluminum Polymer Capacitors.
Typically, RNS1E101MDN1 is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- PFC
- To reduce power noise & signal noise
- Server motherboards
- Lighting Ballast
- DC/DC, DC/AC, and AC/AC converters
- Voltage Doubling
- Power Line Buffering
- UPS Buffering
- Audio Crossover
- Flashtube Ignition
