RNU0G122MDN1PX
| Parameters | |
|---|---|
| Capacitor Type | ALUMINUM ELECTROLYTIC CAPACITOR |
| ESR (Equivalent Series Resistance) | 7mOhm |
| Polarity | Polar |
| Rated (DC) Voltage (URdc) | 4V |
| Leakage Current | 0.96mA |
| Ripple Current | 5.7A |
| Life (Hours) | 2000 hours |
| Tan Delta | 0.08 |
| Height Seated (Max) | 13.0048mm |
| Length | 11.5mm |
| RoHS Status | RoHS Compliant |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Package / Case | Radial |
| Terminal Shape | WIRE |
| Dielectric Material | ALUMINUM (SOLID POLYMER) |
| Published | 2013 |
| Tolerance | 20% |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | -55°C |
| Voltage - Rated | 4V |
| HTS Code | 8532.22.00 |
| Capacitance | 1.2mF |
| Packing Method | TAPE |
| Terminal Pitch | 5mm |
| Lead Pitch | 3.5052mm |
The capacitance can run at the range of 1.2mF.
20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial. The type of the RNU0G122MDN1PX capacitor Nichicon RNU0G122MDN1PX is suitable to conduct the ripple current at 5.7A. RNU0G122MDN1PX Capacitor is mounted by Through Hole. There are 2 terminals embeded in RNU0G122MDN1PX Capacitor. There are 0.96mA to protect the current flowing from the ground conductor to ground. Voltage - Rated often has values of 4V. The part is packaged by TAPE. The dielectric materials are defined as ALUMINUM (SOLID POLYMER). This device's minimum working temperature must not be less than -55°C. It's recommended that you utilize it when the temperature is below 105°C. The capacitor type can be sorted using ALUMINUM ELECTROLYTIC CAPACITOR.
Series
Capacitance: 1.2mF
Tolerance: 20%
Package / Case: Radial
There are great quantities of applications of RNU0G122MDN1PX Aluminum Polymer Capacitors.
Typically, RNU0G122MDN1PX is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- DC/DC, DC/AC, and AC/AC converters
- Bypassing Noise Filtering
- Motor Start
- Spot Welding
- DC Link
- To enhance power efficiency
- Voltage Doubling
- Flashtube Ignition
- Power Line Buffering
- To reduce power noise & signal noise
