RNU1A122MDN1
| Parameters | |
|---|---|
| Lead Spacing | 0.197 5.00mm |
| Lifetime @ Temp | 2000 Hrs @ 105°C |
| Leakage Current | 2.4mA |
| Ripple Current | 6.2A |
| Ripple Current @ Low Frequency | 620mA @ 120Hz |
| Ripple Current @ High Frequency | 6.2A @ 100kHz |
| Dissipation Factor | 0.08 % |
| Diameter | 10mm |
| Height Seated (Max) | 0.551 14.00mm |
| RoHS Status | RoHS Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | Radial, Can |
| Operating Temperature | -55°C~105°C |
| Packaging | Bulk |
| Series | FPCAP, RNU |
| Size / Dimension | 0.394Dia 10.00mm |
| Tolerance | ±20% |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Number of Terminations | 2 |
| Termination | Radial |
| ECCN Code | EAR99 |
| Type | Polymer |
| Terminal Finish | Tin (Sn) |
| Applications | General Purpose |
| HTS Code | 8532.22.00 |
| Capacitance | 1200μF |
| Voltage - Rated DC | 10V |
| Packing Method | Ammo Pack |
| Lead Pitch | 5mm |
| ESR (Equivalent Series Resistance) | 9mOhm |
| Polarity | POLARIZED |
The capacitance can run at the range of 1200μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Bulk packaging. It belongs to FPCAP, RNU series. This part is mounted in the way of Through Hole. The type of the RNU1A122MDN1 capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon RNU1A122MDN1 is suitable to conduct the ripple current at 6.2A. RNU1A122MDN1 Capacitor The typical values of Voltage - Rated DC are 10V. There are 2 terminals embeded in RNU1A122MDN1 Capacitor. There are 2.4mA to protect the current flowing from the ground conductor to ground. It has Radial terminations in total. The part is packaged by Ammo Pack.
FPCAP, RNU Series
Capacitance: 1200μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Bulk
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of RNU1A122MDN1 Aluminum Polymer Capacitors.
Typically, RNU1A122MDN1 is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- PFC
- Flashtube Ignition
- Decoupling Noise Filtering
- Bypassing Noise Filtering
- UPS Buffering
- Audio Crossover
- DC Buffering
- Signal decoupling & power bypass
- Coupling or blocking
- DC Link
