RNU1E391MDN1PH
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Radial, Can |
| Operating Temperature | -55°C~105°C |
| Packaging | Tape & Box (TB) |
| Published | 2013 |
| Series | FPCAP, RNU |
| Size / Dimension | 0.394Dia 10.00mm |
| Tolerance | ±20% |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Type | Polymer |
| Applications | General Purpose |
| Voltage - Rated | 25V |
| HTS Code | 8532.22.00 |
| Capacitance | 390μF |
| Lead Pitch | 5.0038mm |
| ESR (Equivalent Series Resistance) | 14mOhm |
| Polarity | Polar |
| Lead Spacing | 0.197 5.00mm |
| Lifetime @ Temp | 2000 Hrs @ 105°C |
| Ripple Current | 5A |
| Life (Hours) | 2000 hours |
| Ripple Current @ Low Frequency | 500mA @ 120Hz |
| Ripple Current @ High Frequency | 5A @ 100kHz |
| Height Seated (Max) | 0.551 14.00mm |
| RoHS Status | ROHS3 Compliant |
The capacitance can run at the range of 390μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Tape & Box (TB) packaging. It belongs to FPCAP, RNU series. This part is mounted in the way of Through Hole. The type of the RNU1E391MDN1PH capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon RNU1E391MDN1PH is suitable to conduct the ripple current at 5A. RNU1E391MDN1PH Capacitor is mounted by Through Hole. RNU1E391MDN1PH Capacitor. Voltage - Rated often has values of 25V.
FPCAP, RNU Series
Capacitance: 390μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Tape & Box (TB)
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of RNU1E391MDN1PH Aluminum Polymer Capacitors.
Typically, RNU1E391MDN1PH is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Flashtube Ignition
- Power Factor Correction
- Bypassing Noise Filtering
- DC/DC, DC/AC, and AC/AC converters
- Motor Control
- To reduce power noise & signal noise
- Coupling or blocking
- DC Link
- Power Line Buffering
- PFC
