RPA0J471MCN1GS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | Radial, Can - SMD |
| Surface Mount Land Size | 0.406Lx0.406W 10.30mmx10.30mm |
| Operating Temperature | -55°C~105°C |
| Packaging | Tape & Reel (TR) |
| Series | FPCAP, RPA |
| Size / Dimension | 0.394Dia 10.00mm |
| Tolerance | ±20% |
| Part Status | Active |
| Termination | SMD/SMT |
| Type | Polymer |
| Applications | General Purpose |
| Capacitance | 470μF |
| Voltage - Rated DC | 6.3V |
| ESR (Equivalent Series Resistance) | 18mOhm |
| Lifetime @ Temp | 2000 Hrs @ 105°C |
| Leakage Current | 592μA |
| Ripple Current | 4.3A |
| Life (Hours) | 2000 hours |
| Ripple Current @ Low Frequency | 430mA @ 120Hz |
| Ripple Current @ High Frequency | 4.3A @ 100kHz |
| Diameter | 10mm |
| Height Seated (Max) | 0.315 8.00mm |
| RoHS Status | RoHS Compliant |
The capacitance can run at the range of 470μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can - SMD. This capacitor is accessible in the Tape & Reel (TR) packaging. It belongs to FPCAP, RPA series. This part is mounted in the way of Surface Mount. The type of the RPA0J471MCN1GS capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon RPA0J471MCN1GS is suitable to conduct the ripple current at 4.3A. RPA0J471MCN1GS Capacitor The typical values of Voltage - Rated DC are 6.3V. RPA0J471MCN1GS Capacitor. There are 592μA to protect the current flowing from the ground conductor to ground. It has SMD/SMT terminations in total.
FPCAP, RPA Series
Capacitance: 470μF
Tolerance: ±20%
Package / Case: Radial, Can - SMD
Packaging: Tape & Reel (TR)
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of RPA0J471MCN1GS Aluminum Polymer Capacitors.
Typically, RPA0J471MCN1GS is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Motor Control
- Power Factor Correction
- Signal decoupling & power bypass
- DC/DC, DC/AC, and AC/AC converters
- Smoothing Noise Filtering
- Flashtube Ignition
- Bypassing Noise Filtering
- Frequency Converters
- Spot Welding
- Power Line Buffering
