banner_page

RPS1A561MCN1GS

FPCAP, RPS Series 560μF 10V Aluminum Polymer Capacitors ±20% Radial, Can - SMD Surface Mount Tape & Reel (TR)


  • Manufacturer: Nichicon
  • Nocochips NO: 555-RPS1A561MCN1GS
  • Package: Radial, Can - SMD
  • Datasheet: PDF
  • Stock: 626
  • Description: FPCAP, RPS Series 560μF 10V Aluminum Polymer Capacitors ±20% Radial, Can - SMD Surface Mount Tape & Reel (TR) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case Radial, Can - SMD
Surface Mount Land Size 0.406Lx0.406W 10.30mmx10.30mm
Operating Temperature -55°C~105°C
Packaging Tape & Reel (TR)
Published 2009
Series FPCAP, RPS
Size / Dimension 0.394Dia 10.00mm
Tolerance ±20%
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Termination SMD/SMT
Type Polymer
Max Operating Temperature 105°C
Min Operating Temperature -55°C
Applications General Purpose
Voltage - Rated 10V
Capacitance 560μF
Voltage - Rated DC 10V
Lead Pitch 1.1mm
ESR (Equivalent Series Resistance) 13mOhm
Voltage 10V
Lifetime @ Temp 2000 Hrs @ 105°C
Leakage Current 840μA
Ripple Current 5.3A
Ripple Current @ Low Frequency 530mA @ 120Hz
Ripple Current @ High Frequency 5.3A @ 100kHz
Dissipation Factor 0.15 %
Diameter 10mm
Height 12.4mm
Height Seated (Max) 0.488 12.40mm
Length 12.4mm
Radiation Hardening No
RoHS Status ROHS3 Compliant

The capacitance can run at the range of 560μF.


±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can - SMD. This capacitor is accessible in the Tape & Reel (TR) packaging. It belongs to FPCAP, RPS series. This part is mounted in the way of Surface Mount. The type of the RPS1A561MCN1GS capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon RPS1A561MCN1GS is suitable to conduct the ripple current at 5.3A. RPS1A561MCN1GS Capacitor is mounted by Surface Mount. The typical values of Voltage - Rated DC are 10V. RPS1A561MCN1GS Capacitor. There are 840μA to protect the current flowing from the ground conductor to ground. It has SMD/SMT terminations in total. Voltage - Rated often has values of 10V. The voltage for the part is specified as 10V volts. This device's minimum working temperature must not be less than -55°C. It's recommended that you utilize it when the temperature is below 105°C.

FPCAP, RPS Series


Capacitance: 560μF
Tolerance: ±20%
Package / Case: Radial, Can - SMD
Packaging: Tape & Reel (TR)
Works Operating Temperature: -55°C~105°C

There are great quantities of applications of RPS1A561MCN1GS Aluminum Polymer Capacitors.


Typically, RPS1A561MCN1GS is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.

  • Server motherboards
  • PFC
  • UPS Buffering
  • Bypassing Noise Filtering
  • Computer motherboards
  • Power Line Buffering
  • Audio Crossover
  • Spot Welding
  • Decoupling Noise Filtering
  • Flashtube Ignition

Write a review

Note: HTML is not translated!
    Bad           Good