RPS1C821MCN1GS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | Radial, Can - SMD |
| Surface Mount Land Size | 0.406Lx0.406W 10.30mmx10.30mm |
| Operating Temperature | -55°C~105°C |
| Packaging | Tape & Reel (TR) |
| Series | FPCAP, RPS |
| Size / Dimension | 0.394Dia 10.00mm |
| Tolerance | ±20% |
| Part Status | Active |
| Termination | SMD/SMT |
| Type | Polymer |
| Applications | General Purpose |
| Capacitance | 820μF |
| Voltage - Rated DC | 16V |
| ESR (Equivalent Series Resistance) | 18mOhm |
| Lifetime @ Temp | 2000 Hrs @ 105°C |
| Leakage Current | 2.64mA |
| Ripple Current | 4.2A |
| Life (Hours) | 2000 hours |
| Ripple Current @ Low Frequency | 420mA @ 120Hz |
| Ripple Current @ High Frequency | 4.2A @ 100kHz |
| Diameter | 10mm |
| Height Seated (Max) | 0.500 12.70mm |
| RoHS Status | RoHS Compliant |
The capacitance can run at the range of 820μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can - SMD. This capacitor is accessible in the Tape & Reel (TR) packaging. It belongs to FPCAP, RPS series. This part is mounted in the way of Surface Mount. The type of the RPS1C821MCN1GS capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon RPS1C821MCN1GS is suitable to conduct the ripple current at 4.2A. RPS1C821MCN1GS Capacitor The typical values of Voltage - Rated DC are 16V. RPS1C821MCN1GS Capacitor. There are 2.64mA to protect the current flowing from the ground conductor to ground. It has SMD/SMT terminations in total.
FPCAP, RPS Series
Capacitance: 820μF
Tolerance: ±20%
Package / Case: Radial, Can - SMD
Packaging: Tape & Reel (TR)
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of RPS1C821MCN1GS Aluminum Polymer Capacitors.
Typically, RPS1C821MCN1GS is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Signal decoupling & power bypass
- Motor Control
- Decoupling Noise Filtering
- Flashtube Ignition
- UPS Buffering
- To reduce power noise & signal noise
- Power Factor Correction
- To enhance power efficiency
- PFC
- Power Line Buffering
