RR50E561MDN1KX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Package / Case | Radial |
| Terminal Shape | WIRE |
| Dielectric Material | ALUMINUM (SOLID POLYMER) |
| Published | 2015 |
| Tolerance | 20% |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | -55°C |
| Voltage - Rated | 2.5V |
| HTS Code | 8532.22.00 |
| Capacitance | 560μF |
| Packing Method | TAPE |
| Terminal Pitch | 3.5mm |
| Lead Pitch | 3.5052mm |
| Capacitor Type | ALUMINUM ELECTROLYTIC CAPACITOR |
| ESR (Equivalent Series Resistance) | 5mOhm |
| Polarity | Polar |
| Leakage Current | 0.35mA |
| Ripple Current | 6.63A |
| Life (Hours) | 2000 hours |
| Tan Delta | 0.15 |
| Height Seated (Max) | 13.0048mm |
| Length | 11.5mm |
| RoHS Status | RoHS Compliant |
The capacitance can run at the range of 560μF.
20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial. The type of the RR50E561MDN1KX capacitor Nichicon RR50E561MDN1KX is suitable to conduct the ripple current at 6.63A. RR50E561MDN1KX Capacitor is mounted by Through Hole. There are 2 terminals embeded in RR50E561MDN1KX Capacitor. There are 0.35mA to protect the current flowing from the ground conductor to ground. Voltage - Rated often has values of 2.5V. The part is packaged by TAPE. The dielectric materials are defined as ALUMINUM (SOLID POLYMER). This device's minimum working temperature must not be less than -55°C. It's recommended that you utilize it when the temperature is below 105°C. The capacitor type can be sorted using ALUMINUM ELECTROLYTIC CAPACITOR.
Series
Capacitance: 560μF
Tolerance: 20%
Package / Case: Radial
There are great quantities of applications of RR50E561MDN1KX Aluminum Polymer Capacitors.
Typically, RR50E561MDN1KX is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Computer motherboards
- Signal decoupling & power bypass
- Motor Control
- To reduce power noise & signal noise
- Server motherboards
- Coupling or blocking
- Flashtube Ignition
- Voltage Doubling
- To enhance power efficiency
- Power Factor Correction
