RR50J821MDN1PH
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Package / Case | Radial |
| Terminal Shape | WIRE |
| Dielectric Material | ALUMINUM (SOLID POLYMER) |
| Published | 2015 |
| Tolerance | 20% |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | -55°C |
| Voltage - Rated | 6.3V |
| HTS Code | 8532.22.00 |
| Capacitance | 820μF |
| Packing Method | BULK |
| Terminal Pitch | 5mm |
| Lead Pitch | 5.0038mm |
| Capacitor Type | ALUMINUM ELECTROLYTIC CAPACITOR |
| ESR (Equivalent Series Resistance) | 5mOhm |
| Polarity | Polar |
| Leakage Current | 1.292mA |
| Ripple Current | 7.22A |
| Life (Hours) | 2000 hours |
| Tan Delta | 0.15 |
| Diameter | 10mm |
| Height Seated (Max) | 13.9954mm |
| Length | 12.5mm |
| RoHS Status | RoHS Compliant |
The capacitance can run at the range of 820μF.
20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial. The type of the RR50J821MDN1PH capacitor Nichicon RR50J821MDN1PH is suitable to conduct the ripple current at 7.22A. RR50J821MDN1PH Capacitor is mounted by Through Hole. There are 2 terminals embeded in RR50J821MDN1PH Capacitor. There are 1.292mA to protect the current flowing from the ground conductor to ground. Voltage - Rated often has values of 6.3V. The part is packaged by BULK. The dielectric materials are defined as ALUMINUM (SOLID POLYMER). This device's minimum working temperature must not be less than -55°C. It's recommended that you utilize it when the temperature is below 105°C. The capacitor type can be sorted using ALUMINUM ELECTROLYTIC CAPACITOR.
Series
Capacitance: 820μF
Tolerance: 20%
Package / Case: Radial
There are great quantities of applications of RR50J821MDN1PH Aluminum Polymer Capacitors.
Typically, RR50J821MDN1PH is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Lighting Ballast
- Power Line Buffering
- Flashtube Ignition
- Coupling or blocking
- Audio Crossover
- Signal decoupling & power bypass
- To reduce power noise & signal noise
- Server motherboards
- Spot Welding
- Motor Start
