RR70J331MDN1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Radial, Can |
| Terminal Shape | WIRE |
| Operating Temperature | -55°C~105°C |
| Packaging | Bulk |
| Published | 2009 |
| Series | FPCAP, RR7 |
| Size / Dimension | 0.394Dia 10.00mm |
| Tolerance | ±20% |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 2 |
| Termination | Radial |
| ECCN Code | EAR99 |
| Type | Polymer |
| Terminal Finish | Tin (Sn) |
| Applications | General Purpose |
| HTS Code | 8532.22.00 |
| Capacitance | 330μF |
| Voltage - Rated DC | 6.3V |
| Packing Method | TAPE |
| Lead Pitch | 5.0038mm |
| ESR (Equivalent Series Resistance) | 7mOhm |
| Polarity | POLARIZED |
| Lead Spacing | 0.197 5.00mm |
| Lifetime @ Temp | 2000 Hrs @ 105°C |
| Leakage Current | 103.9μA |
| Ripple Current | 6.1A |
| Life (Hours) | 2000 hours |
| Ripple Current @ Low Frequency | 610mA @ 120Hz |
| Ripple Current @ High Frequency | 6.1A @ 100kHz |
| Dissipation Factor | 0.07 % |
| Diameter | 10mm |
| Height | 12.5mm |
| Height Seated (Max) | 0.551 14.00mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
The capacitance can run at the range of 330μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Bulk packaging. It belongs to FPCAP, RR7 series. This part is mounted in the way of Through Hole. The type of the RR70J331MDN1 capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon RR70J331MDN1 is suitable to conduct the ripple current at 6.1A. RR70J331MDN1 Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 6.3V. There are 2 terminals embeded in RR70J331MDN1 Capacitor. There are 103.9μA to protect the current flowing from the ground conductor to ground. It has Radial terminations in total. The part is packaged by TAPE.
FPCAP, RR7 Series
Capacitance: 330μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Bulk
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of RR70J331MDN1 Aluminum Polymer Capacitors.
Typically, RR70J331MDN1 is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- To reduce power noise & signal noise
- Signal decoupling & power bypass
- Spot Welding
- DC Link
- Power Factor Correction
- Voltage Doubling
- UPS Buffering
- Frequency Converters
- Bypassing Noise Filtering
- To enhance power efficiency
