RR70J391MDN1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Radial, Can |
| Dielectric Material | ALUMINUM |
| Operating Temperature | -55°C~105°C |
| Packaging | Bulk |
| Published | 2009 |
| Series | FPCAP, RR7 |
| Size / Dimension | 0.315Dia 8.00mm |
| Tolerance | ±20% |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 2 |
| Termination | Radial |
| ECCN Code | EAR99 |
| Type | Polymer |
| Terminal Finish | Tin (Sn) |
| Applications | General Purpose |
| HTS Code | 8532.22.00 |
| Capacitance | 390μF |
| Voltage - Rated DC | 6.3V |
| Terminal Pitch | 3.5mm |
| Lead Pitch | 3.5052mm |
| ESR (Equivalent Series Resistance) | 7mOhm |
| Polarity | POLARIZED |
| Lead Spacing | 0.138 3.50mm |
| Lifetime @ Temp | 2000 Hrs @ 105°C |
| Leakage Current | 245.7μA |
| Ripple Current | 5.6A |
| Life (Hours) | 2000 hours |
| Ripple Current @ Low Frequency | 560mA @ 120Hz |
| Ripple Current @ High Frequency | 5.6A @ 100kHz |
| Dissipation Factor | 0.08 % |
| Diameter | 8mm |
| Height | 11.5mm |
| Height Seated (Max) | 0.512 13.00mm |
| RoHS Status | ROHS3 Compliant |
RR70J391MDN1 Overview
The capacitance can run at the range of 390μF. ±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Bulk packaging. It belongs to FPCAP, RR7 series. This part is mounted in the way of Through Hole. The type of the RR70J391MDN1 capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon RR70J391MDN1 is suitable to conduct the ripple current at 5.6A. RR70J391MDN1 Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 6.3V. There are 2 terminals embeded in RR70J391MDN1 Capacitor. There are 245.7μA to protect the current flowing from the ground conductor to ground. It has Radial terminations in total. The dielectric materials are defined as ALUMINUM.
RR70J391MDN1 Features
FPCAP, RR7 Series
Capacitance: 390μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Bulk
Works Operating Temperature: -55°C~105°C
RR70J391MDN1 Applications
There are great quantities of applications of RR70J391MDN1 Aluminum Polymer Capacitors. Typically, RR70J391MDN1 is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- UPS Buffering
- Decoupling Noise Filtering
- Power Line Buffering
- PFC
- To enhance power efficiency
- DC/DC, DC/AC, and AC/AC converters
- Server motherboards
- Bypassing Noise Filtering
- DC Buffering
- Audio Crossover
