RR70J391MDN1KX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Package / Case | Radial |
| Terminal Shape | WIRE |
| Dielectric Material | ALUMINUM (SOLID POLYMER) |
| Published | 2015 |
| Tolerance | 20% |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | -55°C |
| Voltage - Rated | 6.3V |
| HTS Code | 8532.22.00 |
| Capacitance | 390μF |
| Packing Method | TAPE |
| Terminal Pitch | 3.5mm |
| Lead Pitch | 3.5052mm |
| Capacitor Type | ALUMINUM ELECTROLYTIC CAPACITOR |
| ESR (Equivalent Series Resistance) | 7mOhm |
| Polarity | Polar |
| Leakage Current | 0.246mA |
| Ripple Current | 5.6A |
| Life (Hours) | 2000 hours |
| Tan Delta | 0.08 |
| Height Seated (Max) | 13.0048mm |
| Length | 11.5mm |
| RoHS Status | RoHS Compliant |
The capacitance can run at the range of 390μF.
20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial. The type of the RR70J391MDN1KX capacitor Nichicon RR70J391MDN1KX is suitable to conduct the ripple current at 5.6A. RR70J391MDN1KX Capacitor is mounted by Through Hole. There are 2 terminals embeded in RR70J391MDN1KX Capacitor. There are 0.246mA to protect the current flowing from the ground conductor to ground. Voltage - Rated often has values of 6.3V. The part is packaged by TAPE. The dielectric materials are defined as ALUMINUM (SOLID POLYMER). This device's minimum working temperature must not be less than -55°C. It's recommended that you utilize it when the temperature is below 105°C. The capacitor type can be sorted using ALUMINUM ELECTROLYTIC CAPACITOR.
Series
Capacitance: 390μF
Tolerance: 20%
Package / Case: Radial
There are great quantities of applications of RR70J391MDN1KX Aluminum Polymer Capacitors.
Typically, RR70J391MDN1KX is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Motor Start
- Decoupling Noise Filtering
- Bypassing Noise Filtering
- Spot Welding
- Computer motherboards
- Power Line Buffering
- To enhance power efficiency
- Flashtube Ignition
- DC/DC, DC/AC, and AC/AC converters
- Power Factor Correction
