RR71A101MDN1KX
| Parameters | |
|---|---|
| Packing Method | TAPE |
| Terminal Pitch | 3.5mm |
| Lead Pitch | 3.5052mm |
| Capacitor Type | ALUMINUM ELECTROLYTIC CAPACITOR |
| ESR (Equivalent Series Resistance) | 7mOhm |
| Polarity | Polar |
| Leakage Current | 0.05mA |
| Ripple Current | 5.6A |
| Life (Hours) | 2000 hours |
| Tan Delta | 0.07 |
| Height Seated (Max) | 13.0048mm |
| Length | 11.5mm |
| RoHS Status | RoHS Compliant |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Package / Case | Radial |
| Terminal Shape | WIRE |
| Dielectric Material | ALUMINUM (SOLID POLYMER) |
| Published | 2015 |
| Tolerance | 20% |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | -55°C |
| Voltage - Rated | 10V |
| HTS Code | 8532.22.00 |
| Capacitance | 100μF |
The capacitance can run at the range of 100μF.
20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial. The type of the RR71A101MDN1KX capacitor Nichicon RR71A101MDN1KX is suitable to conduct the ripple current at 5.6A. RR71A101MDN1KX Capacitor is mounted by Through Hole. There are 2 terminals embeded in RR71A101MDN1KX Capacitor. There are 0.05mA to protect the current flowing from the ground conductor to ground. Voltage - Rated often has values of 10V. The part is packaged by TAPE. The dielectric materials are defined as ALUMINUM (SOLID POLYMER). This device's minimum working temperature must not be less than -55°C. It's recommended that you utilize it when the temperature is below 105°C. The capacitor type can be sorted using ALUMINUM ELECTROLYTIC CAPACITOR.
Series
Capacitance: 100μF
Tolerance: 20%
Package / Case: Radial
There are great quantities of applications of RR71A101MDN1KX Aluminum Polymer Capacitors.
Typically, RR71A101MDN1KX is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Motor Control
- Spot Welding
- Motor Start
- Decoupling Noise Filtering
- To reduce power noise & signal noise
- Signal decoupling & power bypass
- DC/DC, DC/AC, and AC/AC converters
- Frequency Converters
- Lighting Ballast
- UPS Buffering
