Parameters |
Factory Lead Time |
1 Week |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
Radial, Can |
Dielectric Material |
ALUMINUM (DRY/SOLID) |
Operating Temperature |
-55°C~105°C |
Packaging |
Bulk |
Published |
2015 |
Series |
FPCAP, RS8 |
Size / Dimension |
0.248Dia 6.30mm |
Tolerance |
±20% |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
2 |
ECCN Code |
EAR99 |
Type |
Polymer |
Terminal Finish |
Tin (Sn) |
Applications |
General Purpose |
Voltage - Rated |
2.5V |
HTS Code |
8532.22.00 |
Capacitance |
1200μF |
Lead Pitch |
2.4892mm |
ESR (Equivalent Series Resistance) |
7mOhm |
Polarity |
Polar |
Lead Spacing |
0.098 2.50mm |
Lifetime @ Temp |
2000 Hrs @ 105°C |
Ripple Current |
5.6A |
Life (Hours) |
2000 hours |
Ripple Current @ Low Frequency |
560mA @ 120Hz |
Ripple Current @ High Frequency |
5.6A @ 100kHz |
Height Seated (Max) |
0.354 9.00mm |
RoHS Status |
ROHS3 Compliant |
The capacitance can run at the range of 1200μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Bulk packaging. It belongs to FPCAP, RS8 series. This part is mounted in the way of Through Hole. The type of the RS80E122MDN1 capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon RS80E122MDN1 is suitable to conduct the ripple current at 5.6A. RS80E122MDN1 Capacitor is mounted by Through Hole. There are 2 terminals embeded in RS80E122MDN1 Capacitor. Voltage - Rated often has values of 2.5V. The dielectric materials are defined as ALUMINUM (DRY/SOLID).
FPCAP, RS8 Series
Capacitance: 1200μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Bulk
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of RS80E122MDN1 Aluminum Polymer Capacitors.
Typically, RS80E122MDN1 is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Voltage Doubling
- To reduce power noise & signal noise
- Server motherboards
- To enhance power efficiency
- Lighting Ballast
- Frequency Converters
- DC/DC, DC/AC, and AC/AC converters
- Spot Welding
- Power Line Buffering
- PFC