RS80E122MDN1JT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Radial, Can |
| Dielectric Material | ALUMINUM (DRY/SOLID) |
| Operating Temperature | -55°C~105°C |
| Packaging | Tape & Box (TB) |
| Published | 2013 |
| Series | FPCAP, RS8 |
| Size / Dimension | 0.248Dia 6.30mm |
| Tolerance | ±20% |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 2 |
| Termination | Radial |
| ECCN Code | EAR99 |
| Type | Polymer |
| Terminal Finish | Tin (Sn) |
| Applications | General Purpose |
| HTS Code | 8532.22.00 |
| Capacitance | 1200μF |
| Voltage - Rated DC | 2.5V |
| Lead Pitch | 2.4892mm |
| ESR (Equivalent Series Resistance) | 7mOhm |
| Lead Spacing | 0.098 2.50mm |
| Lifetime @ Temp | 2000 Hrs @ 105°C |
| Leakage Current | 750μA |
| Ripple Current | 5.6A |
| Life (Hours) | 2000 hours |
| Ripple Current @ Low Frequency | 560mA @ 120Hz |
| Ripple Current @ High Frequency | 5.6A @ 100kHz |
| Dissipation Factor | 0.1 % |
| Diameter | 6.3mm |
| Height | 8mm |
| Height Seated (Max) | 0.354 9.00mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
The capacitance can run at the range of 1200μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Tape & Box (TB) packaging. It belongs to FPCAP, RS8 series. This part is mounted in the way of Through Hole. The type of the RS80E122MDN1JT capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon RS80E122MDN1JT is suitable to conduct the ripple current at 5.6A. RS80E122MDN1JT Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 2.5V. There are 2 terminals embeded in RS80E122MDN1JT Capacitor. There are 750μA to protect the current flowing from the ground conductor to ground. It has Radial terminations in total. The dielectric materials are defined as ALUMINUM (DRY/SOLID).
FPCAP, RS8 Series
Capacitance: 1200μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Tape & Box (TB)
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of RS80E122MDN1JT Aluminum Polymer Capacitors.
Typically, RS80E122MDN1JT is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Frequency Converters
- Bypassing Noise Filtering
- Flashtube Ignition
- Computer motherboards
- Lighting Ballast
- Spot Welding
- To reduce power noise & signal noise
- Audio Crossover
- Signal decoupling & power bypass
- Server motherboards
