RS80J331MDNASQPX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Package / Case | Radial |
| Terminal Shape | WIRE |
| Dielectric Material | ALUMINUM (SOLID POLYMER) |
| Published | 2015 |
| Tolerance | 20% |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | -55°C |
| Voltage - Rated | 6.3V |
| HTS Code | 8532.22.00 |
| Capacitance | 330μF |
| Packing Method | TAPE |
| Terminal Pitch | 5mm |
| Lead Pitch | 2.4892mm |
| Capacitor Type | ALUMINUM ELECTROLYTIC CAPACITOR |
| ESR (Equivalent Series Resistance) | 8mOhm |
| Polarity | Polar |
| Leakage Current | 0.519mA |
| Ripple Current | 5A |
| Life (Hours) | 5000 hours |
| Tan Delta | 0.1 |
| Diameter | 6.3mm |
| Height Seated (Max) | 8.9916mm |
| Length | 8mm |
| RoHS Status | RoHS Compliant |
The capacitance can run at the range of 330μF.
20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial. The type of the RS80J331MDNASQPX capacitor Nichicon RS80J331MDNASQPX is suitable to conduct the ripple current at 5A. RS80J331MDNASQPX Capacitor is mounted by Through Hole. There are 2 terminals embeded in RS80J331MDNASQPX Capacitor. There are 0.519mA to protect the current flowing from the ground conductor to ground. Voltage - Rated often has values of 6.3V. The part is packaged by TAPE. The dielectric materials are defined as ALUMINUM (SOLID POLYMER). This device's minimum working temperature must not be less than -55°C. It's recommended that you utilize it when the temperature is below 105°C. The capacitor type can be sorted using ALUMINUM ELECTROLYTIC CAPACITOR.
Series
Capacitance: 330μF
Tolerance: 20%
Package / Case: Radial
There are great quantities of applications of RS80J331MDNASQPX Aluminum Polymer Capacitors.
Typically, RS80J331MDNASQPX is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Power Factor Correction
- Smoothing Noise Filtering
- To reduce power noise & signal noise
- To enhance power efficiency
- Motor Control
- Audio Crossover
- Bypassing Noise Filtering
- Lighting Ballast
- Frequency Converters
- DC Link
