RS80J561MDNASQPX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Radial, Can |
| Terminal Shape | WIRE |
| Operating Temperature | -55°C~105°C |
| Packaging | Tape & Box (TB) |
| Published | 2009 |
| Series | FPCAP, RS8 |
| Size / Dimension | 0.248Dia 6.30mm |
| Tolerance | ±20% |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 2 |
| Termination | Radial |
| ECCN Code | EAR99 |
| Type | Polymer |
| Terminal Finish | Tin (Sn) |
| Applications | General Purpose |
| HTS Code | 8532.22.00 |
| Capacitance | 560μF |
| Voltage - Rated DC | 6.3V |
| Terminal Pitch | 5mm |
| Lead Pitch | 2.4892mm |
| ESR (Equivalent Series Resistance) | 8mOhm |
| Polarity | Polar |
| Lead Spacing | 0.098 2.50mm |
| Lead Diameter | 600 μm |
| Voltage | 6.3V |
| Lifetime @ Temp | 5000 Hrs @ 105°C |
| Leakage Current | 882μA |
| Ripple Current | 5A |
| Life (Hours) | 5000 hours |
| Tan Delta | 0.1 |
| Ripple Current @ Low Frequency | 500mA @ 120Hz |
| Ripple Current @ High Frequency | 5A @ 100kHz |
| Dissipation Factor | 0.1 % |
| Diameter | 6.3mm |
| Height | 8mm |
| Height Seated (Max) | 0.354 9.00mm |
| RoHS Status | ROHS3 Compliant |
The capacitance can run at the range of 560μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Tape & Box (TB) packaging. It belongs to FPCAP, RS8 series. This part is mounted in the way of Through Hole. The type of the RS80J561MDNASQPX capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon RS80J561MDNASQPX is suitable to conduct the ripple current at 5A. RS80J561MDNASQPX Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 6.3V. There are 2 terminals embeded in RS80J561MDNASQPX Capacitor. There are 882μA to protect the current flowing from the ground conductor to ground. It has Radial terminations in total. The voltage for the part is specified as 6.3V volts.
FPCAP, RS8 Series
Capacitance: 560μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Tape & Box (TB)
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of RS80J561MDNASQPX Aluminum Polymer Capacitors.
Typically, RS80J561MDNASQPX is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Voltage Doubling
- Signal decoupling & power bypass
- Power Line Buffering
- Bypassing Noise Filtering
- Smoothing Noise Filtering
- Audio Crossover
- Frequency Converters
- Lighting Ballast
- To reduce power noise & signal noise
- UPS Buffering
