Parameters |
Factory Lead Time |
1 Week |
Mount |
Through Hole |
Package / Case |
Radial |
Dielectric Material |
ALUMINUM (SOLID POLYMER) |
Published |
2015 |
Tolerance |
20% |
Part Status |
Active |
Number of Terminations |
2 |
ECCN Code |
EAR99 |
Max Operating Temperature |
105°C |
Min Operating Temperature |
-55°C |
Voltage - Rated |
6.3V |
HTS Code |
8532.22.00 |
Capacitance |
680μF |
Lead Pitch |
2.4892mm |
Capacitor Type |
ALUMINUM ELECTROLYTIC CAPACITOR |
ESR (Equivalent Series Resistance) |
8mOhm |
Polarity |
Polar |
Ripple Current |
4.7A |
Life (Hours) |
2000 hours |
Height Seated (Max) |
8.9916mm |
RoHS Status |
RoHS Compliant |
The capacitance can run at the range of 680μF.
20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial. The type of the RS80J681MCN1JT capacitor Nichicon RS80J681MCN1JT is suitable to conduct the ripple current at 4.7A. RS80J681MCN1JT Capacitor is mounted by Through Hole. There are 2 terminals embeded in RS80J681MCN1JT Capacitor. Voltage - Rated often has values of 6.3V. The dielectric materials are defined as ALUMINUM (SOLID POLYMER). This device's minimum working temperature must not be less than -55°C. It's recommended that you utilize it when the temperature is below 105°C. The capacitor type can be sorted using ALUMINUM ELECTROLYTIC CAPACITOR.
Series
Capacitance: 680μF
Tolerance: 20%
Package / Case: Radial
There are great quantities of applications of RS80J681MCN1JT Aluminum Polymer Capacitors.
Typically, RS80J681MCN1JT is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Power Factor Correction
- To enhance power efficiency
- DC/DC, DC/AC, and AC/AC converters
- Motor Start
- Spot Welding
- Motor Control
- Lighting Ballast
- To reduce power noise & signal noise
- PFC
- DC Link