Parameters |
Ripple Current @ High Frequency |
3.8A @ 100kHz |
Dissipation Factor |
0.1 % |
Height Seated (Max) |
0.354 9.00mm |
RoHS Status |
ROHS3 Compliant |
Factory Lead Time |
1 Week |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
Radial, Can |
Operating Temperature |
-55°C~105°C |
Packaging |
Bulk |
Published |
2015 |
Series |
FPCAP, RS8 |
Size / Dimension |
0.248Dia 6.30mm |
Tolerance |
±20% |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Termination |
Radial |
Type |
Polymer |
Applications |
General Purpose |
Capacitance |
270μF |
Voltage - Rated DC |
16V |
Lead Pitch |
2.4892mm |
ESR (Equivalent Series Resistance) |
15mOhm |
Polarity |
Polar |
Lead Spacing |
0.098 2.50mm |
Lifetime @ Temp |
2000 Hrs @ 105°C |
Leakage Current |
1.296mA |
Ripple Current |
3.8A |
Life (Hours) |
2000 hours |
Ripple Current @ Low Frequency |
380mA @ 120Hz |
The capacitance can run at the range of 270μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Bulk packaging. It belongs to FPCAP, RS8 series. This part is mounted in the way of Through Hole. The type of the RS81C271MDN1 capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon RS81C271MDN1 is suitable to conduct the ripple current at 3.8A. RS81C271MDN1 Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 16V. RS81C271MDN1 Capacitor. There are 1.296mA to protect the current flowing from the ground conductor to ground. It has Radial terminations in total.
FPCAP, RS8 Series
Capacitance: 270μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Bulk
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of RS81C271MDN1 Aluminum Polymer Capacitors.
Typically, RS81C271MDN1 is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Spot Welding
- To reduce power noise & signal noise
- Motor Start
- Bypassing Noise Filtering
- DC Buffering
- Power Factor Correction
- Motor Control
- Audio Crossover
- Server motherboards
- Decoupling Noise Filtering