RT8129AGQW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Number of Pins | 10 |
| Supplier Device Package | 10-WDFN (3x3) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2015 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Frequency | 300kHz |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Max Supply Voltage | 13.2V |
| Min Supply Voltage | 4.5V |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.5V~13.2V |
| Control Features | Current Limit, Enable, Phase Control, Power Good |
| Topology | Buck |
| Frequency - Switching | 300kHz |
| Synchronous Rectifier | Yes |
| Nominal Input Voltage | 25V |
| Clock Sync | No |
| Output Phases | 1 |
| Number of Output Phases | 1 |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
RT8129AGQW Overview
The switching controller fits in the 10-WFDFN Exposed Pad package and is ideal for most applications. For 1 outputs, the dc motor controller is appropriate. PMIC packaging is solid with a Cut Tape (CT) enclosure. A total of Transistor Driver dc switching's outputs can be handled by it. This dc control operates at 4.5V~13.2V and has a 4.5V~13.2V supply voltage. Worked in an dc switcher with a -40°C~85°C TA rating. In this switching controller, the switch can be set to 300kHz. The Surface Mount allows it to be used for dc dc regulator in general. In order to control switching efficiently, the dcdc regulator features Current Limit, Enable, Phase Control, Power Good. There are a total of 10 pins on switching converter. Switching controller operates at 300kHz Hz. DC regulator should be kept at a temperature of -40°C or higher. There should be 85°C temperature above 85°C degrees Celsius when dc regulator runs. It is possible to set the input voltage to 25V for nominal working status. There is 10-WDFN (3x3) dc dc controller package associated with this part. Switching with 1 phases is the property of this controller. Voltage is rated 13.2V for maximum supply.
RT8129AGQW Features
Transistor Driver Outputs
Switching Frequency: 300kHz
Current Limit, Enable, Phase Control, Power Good
Frequency: 300kHz
RT8129AGQW Applications
There are a lot of Richtek USA Inc. RT8129AGQW DC to DC converter applications.
- Energy management systems
- Television equipment
- Program control systems
- ATMs
- Domestic water pumps
- Flaw detection equipment
- Product testing
- Automatic plug-in machines
- Magnetohydrodynamic power
- Computer rooms
