RT8476AGSP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) Exposed Pad |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOP-EP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2015 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Type | DC DC Regulator |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Applications | Automotive, Lighting, Signage |
| Number of Outputs | 1 |
| Max Supply Voltage | 40V |
| Topology | Step-Down (Buck), Step-Up (Boost) |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 40V |
| Internal Switch(s) | No |
| Dimming | Analog, PWM |
| Switching Frequency | 800kHz |
| Voltage - Supply (Max) | 40V |
| Voltage - Supply (Min) | 4.5V |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
RT8476AGSP Overview
There is a 8-SOIC (0.154, 3.90mm Width) Exposed Pad package on the board that is used to save space. As part of the design of this LED driver, there are 1 outputs that have been used.The mounting method adopted is Surface Mount.It emergys as a DC DC Regulator with high efficiency and reliable performance.If the led driver ic is set to -40°C~85°C TA, it will work normally.There are many benefits for Automotive, Lighting, Signage.There are 8 pins used to form the base of its configuration.It is possible that failures will occur if the voltage supply is below 4.5V.This is mounted by Surface Mount.40V is a reasonable voltage.It supports a maximum value of 40V.The input voltage must be minimally 4.5V.There is 40V maximum value for supply current.For stable operation, it is recommended that the operating temperature not exceed 85°C.Stable operation requires an operating temperature greater than -40°C.This electronic component may perform its functions fully if the switching frequency is maintained at 800kHz.
RT8476AGSP Features
Available in the 8-SOIC (0.154, 3.90mm Width) Exposed Pad package
Operating temperature of -40°C~85°C TA
Switching frequency of 800kHz
RT8476AGSP Applications
There are a lot of Richtek USA Inc. RT8476AGSP LED Driver ICs applications.
- LED backlight driver for LCD displays for portable equipment
- Refrigeration lighting
- Dimmable LED for vehicle interiors
- Stage Lighting and Signage
- General lighting
- Constant Voltage Power Source for portable equipment
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- OLED power supply for portable equipment
- Scanners and Handy Terminals
- LED Lightings for Industrial Equipment
