RT9284A-20GJ6E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Number of Pins | 23 |
| Supplier Device Package | TSOT-23-6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Type | DC DC Regulator |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Applications | Backlight, Camera Flash |
| Frequency | 1.2MHz |
| Number of Outputs | 1 |
| Max Output Current | 100mA |
| Max Supply Voltage | 5.5V |
| Output Current | 100mA |
| Voltage - Output | 20V |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Output Current per Channel | 100mA |
| Current - Output / Channel | 100mA |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Switching Frequency | 1.2MHz |
| Voltage - Supply (Max) | 5.5V |
| Voltage - Supply (Min) | 2.7V |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
RT9284A-20GJ6E Overview
It saves board space with the SOT-23-6 Thin, TSOT-23-6 package. Typically, LED drivers have 1 outputs.As a mounting method, Surface Mount is used.With high efficiency, it appears as a DC DC Regulator.-40°C~85°C TA is the operating temperature and it works fine.As a result, Backlight, Camera Flash is likely to benefit greatly.A frequency of 1.2MHz is used to operate it.In this LED driver, the base is configured as 23.It is likely that undetermined failures will occur if the voltage supply is less than 2.7V.The mount is in the way of Surface Mount.The voltage of 5.5V can be supplied.A voltage of 20V is produced by it.It supports a maximum value of 5.5V.A voltage of 2.7V is its minimal input voltage.The maximum value of supply current is 5.5V.In order to ensure stable operation, the operating temperature should not exceed 85°C.Loads can only be powered by 100mA current.Stable operation requires a temperature greater than -40°C.The electronic component can function fully when the switching frequency is maintained at 1.2MHz.At maximum output current 100mA, it will deliver all the benefits of a LED driver.
RT9284A-20GJ6E Features
Available in the SOT-23-6 Thin, TSOT-23-6 package
Operating temperature of -40°C~85°C TA
Frequency of 1.2MHz
Switching frequency of 1.2MHz
RT9284A-20GJ6E Applications
There are a lot of Richtek USA Inc. RT9284A-20GJ6E LED Driver ICs applications.
- Amusement Machines
- Refrigeration lighting
- Constant Voltage Power Source for portable equipment
- Dimmable LED for vehicle interiors
- Gallery lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
- Down lighting
- Down lights
- LED headlights
- General lighting
