RT9284B-15GJ6E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Number of Pins | 23 |
| Supplier Device Package | TSOT-23-6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Type | DC DC Regulator |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Applications | Backlight, Camera Flash |
| Frequency | 1.2MHz |
| Number of Outputs | 1 |
| Max Output Current | 100mA |
| Max Supply Voltage | 5.5V |
| Output Current | 100mA |
| Voltage - Output | 20V |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Output Current per Channel | 100mA |
| Current - Output / Channel | 100mA |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Switching Frequency | 1.2MHz |
| Voltage - Supply (Max) | 5.5V |
| Voltage - Supply (Min) | 2.7V |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
RT9284B-15GJ6E Overview
In order to save board space, the led driver uses the SOT-23-6 Thin, TSOT-23-6 package. In this LED driver, there are 1 outputs.It is possible to mount the led driver using Surface Mount.It is highly performing and reliable when it emerges as a DC DC Regulator.It is possible for the led light driver to operate at a temperature of -40°C~85°C TA.As a result, Backlight, Camera Flash is likely to benefit greatly.Using the frequency of 1.2MHz, it operates.To form its configuration, 23 pins are used.In the absence of a voltage supply of at least 2.7V, undetermined failures may occur.It's mounted by Surface Mount.It is acceptable to supply voltages of 5.5V.There is 20V voltage output from this device.It is designed to provide a supply voltage of 5.5V at its maximum.This device operates with a minimum input voltage of 2.7V volts.The maximum supply current is 5.5V.It is important that the operating temperature not exceed 85°C in order to ensure stable operation.In this case, the load can only be supplied with 100mA current.In order to maintain stable operation, a temperature greater than -40°C is essential.This electronic component can fully perform when the switching frequency is 1.2MHz.LED drivers are able to deliver all the benefits of LEDs at their maximum output current of 100mA.
RT9284B-15GJ6E Features
Available in the SOT-23-6 Thin, TSOT-23-6 package
Operating temperature of -40°C~85°C TA
Frequency of 1.2MHz
Switching frequency of 1.2MHz
RT9284B-15GJ6E Applications
There are a lot of Richtek USA Inc. RT9284B-15GJ6E LED Driver ICs applications.
- LED Lightings for Industrial Equipment
- LED Lightings for Inspection Devices
- White LED Backlight for portable equipment
- Sports Facility Lighting
- Linear fluorescent
- Architectural lighting
- Museum lighting
- LED Lighting PFCs, Linear Dimmable
- General lighting
- Street lighting
