RT9284B-20GJ6E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Number of Pins | 23 |
| Supplier Device Package | TSOT-23-6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Type | DC DC Regulator |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Applications | Backlight, Camera Flash |
| Frequency | 1.2MHz |
| Number of Outputs | 1 |
| Max Output Current | 100mA |
| Max Supply Voltage | 5.5V |
| Output Current | 100mA |
| Voltage - Output | 20V |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Output Current per Channel | 100mA |
| Current - Output / Channel | 100mA |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Switching Frequency | 1.2MHz |
| Voltage - Supply (Max) | 5.5V |
| Voltage - Supply (Min) | 2.7V |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
RT9284B-20GJ6E Overview
Using its SOT-23-6 Thin, TSOT-23-6 package, it is possible to save board space. In this LED driver, there are 1 outputs.Mounting is done according to the Surface Mount method.It emergys as a DC DC Regulator with high efficiency and reliable performance.The led light driver operates normally at -40°C~85°C TA. As a result, Backlight, Camera Flash is likely to benefit greatly.In the 1.2MHz frequency range, it operates.To form its configuration, there are 23 pins.Undetermined failures will occur if the voltage supply is less than 2.7V.There is a device mounted on the Surface Mount.Ideally, the supply voltage should be 5.5V.The device has a voltage output of 20V volts.It is optimized for offering a maximum value of supply voltage of 5.5V.This device requires a minimum voltage of 2.7V volts.In the event that the maximum supply current is allowed, it reaches 5.5V.It is important not to exceed 85°C in order to ensure stable operation.In this case, the load can only be supplied with 100mA current.Stable operation requires a temperature higher than -40°C.As long as the switching frequency is maintained at 1.2MHz, this electronic component is able to perform all of its functions properly.When operating at the maximum output current of 100mA, it is capable of providing all the benefits associated with LED drivers.
RT9284B-20GJ6E Features
Available in the SOT-23-6 Thin, TSOT-23-6 package
Operating temperature of -40°C~85°C TA
Frequency of 1.2MHz
Switching frequency of 1.2MHz
RT9284B-20GJ6E Applications
There are a lot of Richtek USA Inc. RT9284B-20GJ6E LED Driver ICs applications.
- LED Lighting PFCs, Linear Dimmable
- OLED power supply for portable equipment
- Architectural lighting
- Panel lighting
- Medical surgery lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Linear fluorescent
- LED backlight driver for LCD displays for portable equipment
- Stage Lighting and Signage
- Stage and Studio lighting
