Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SOT-23-6 |
Number of Pins |
6 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2012 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Type |
DC DC Regulator |
Applications |
Camera Flash |
Frequency |
1MHz |
Number of Outputs |
1 |
Max Supply Voltage |
4.5V |
Output Current |
150mA |
Topology |
Switched Capacitor (Charge Pump) |
Output Current per Channel |
500mA |
Current - Output / Channel |
500mA Switch |
Internal Switch(s) |
Yes |
Dimming |
PWM |
Voltage - Supply (Min) |
2.8V |
REACH SVHC |
Unknown |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
RT9361BGE Overview
The SOT-23-6 package saves space on the board. A LED driver with 1 outputs is designed.The led light driver is mounted using Surface Mount.In this case, it emerges as a DC DC Regulator with a high efficiency.This LED driver can be operated at a temperature of -40°C~85°C TA. The benefits of Camera Flash are considerable.Based on the frequency of 1MHz, it operates on the basis of a pulse.This configuration is built upon 6 pins.If the voltage supply is below 2.8V, undetermined failures may occur.Surface Mount is mounted in the way.There is no maximum value acceptable for the supply voltage, so 4.5V is acceptable.Loads can only be powered by 150mA current.
RT9361BGE Features
Available in the SOT-23-6 package
Operating temperature of -40°C~85°C TA
Frequency of 1MHz
RT9361BGE Applications
There are a lot of Richtek USA Inc. RT9361BGE LED Driver ICs applications.
- Panel lighting
- High-end retail lighting
- Scanners and Handy Terminals
- Other Electronic Devices
- Flicker-free LED Lighting using R1580N
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Sports Facility Lighting
- Auxiliary lights for on-vehicle cameras
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Stage Lighting and Signage