banner_page

RT9702AGJ5

N-Channel 0.939mm PMIC 23 Pin 5V SOT-23-5 Thin, TSOT-23-5


  • Manufacturer: Richtek USA Inc.
  • Nocochips NO: 682-RT9702AGJ5
  • Package: SOT-23-5 Thin, TSOT-23-5
  • Datasheet: -
  • Stock: 853
  • Description: N-Channel 0.939mm PMIC 23 Pin 5V SOT-23-5 Thin, TSOT-23-5 (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mounting Type Surface Mount
Package / Case SOT-23-5 Thin, TSOT-23-5
Surface Mount YES
Number of Pins 23
Operating Temperature -40°C~125°C TJ
Packaging Tape & Reel (TR)
Published 2011
Feature Status Flag
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 5
ECCN Code EAR99
Resistance 80mOhm
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) NOT SPECIFIED
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.939mm
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
JESD-30 Code R-PDSO-G5
Number of Outputs 1
Output Type N-Channel
Max Output Current 1.1A
Supply Voltage-Max (Vsup) 5.5V
Supply Voltage-Min (Vsup) 2V
Interface On/Off
Output Configuration High Side
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Switch Type USB Switch
Ratio - Input:Output 1:1
Voltage - Load 2V~5.5V
Fault Protection Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO
Output Peak Current Limit-Nom 1.5A
Rds On (Typ) 80m Ω
Built-in Protections OVER CURRENT; THERMAL; UNDER VOLTAGE
Output Current Flow Direction SINK
Length 2.8955mm
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant

RT9702AGJ5 Overview


The LED driver's packaged as a Tape & Reel (TR).There is a SOT-23-5 Thin, TSOT-23-5 package that includes it.In this case, the LED driving board is mounted as Surface Mount.The switch type of this switch is USB Switch.To ensure reliable performance, the temperature should be set to -40°C~125°C TJ.By default, it is set to output 1.With a supply voltage of Not Required, the LED driving board operates.A maximum voltage of N-Channel volts is available from the output of this LED driver.In terms of features, the LED driving board has Status Flag.A total of 5 terminations have been found in it.During operation, the 23 pins are used.Currently, there are 1 functions associated with the lighting driver.To meet the operation criteria, the maximum output current drops to 1.1A.The supply voltage can be 5V for high efficiency.Currently, the LED driving board has 80mOhm resistance.In this case, Vsup (maximum supply voltage) is set to 5.5V.For normal operation, the supply voltage (Vsup) should be kept above 2V.

RT9702AGJ5 Features


Supplied from 5V
Resistance of 80mOhm

RT9702AGJ5 Applications


There are a lot of Richtek USA Inc. RT9702AGJ5 Power Switches ICs applications.

  • Portable Devices
  • Notebook and Tablet Computers
  • Solid-State Drives
  • Wearable Devices
  • Notebook PC
  • Hard Disk Drives
  • HDD and SSD
  • Hot-Swap Systems
  • Mobile Communication Devices
  • Hot Swap

Write a review

Note: HTML is not translated!
    Bad           Good