RT9702GB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 80mOhm |
| Max Power Dissipation | 400mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.939mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Supply Voltage-Min (Vsup) | 2V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Output Peak Current Limit-Nom | 0.8A |
| Rds On (Typ) | 80m Ω |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
RT9702GB Overview
It is package in Tape & Reel (TR) case.There is a SC-74A, SOT-753 package that includes it.The LED driver is mounted as Surface Mount.The switch type of this switch is USB Switch.In order to guarantee reliable performance, the temperature should be set to -40°C~125°C TJ.The lighting driver has a total of 1 outputs that are available for use.Operation is based on Not Required supply voltage.A maximum output voltage of N-Channel volts can be achieved by this LED driver.In terms of features, the LED driving board has Status Flag.There are 5 terminations in it.During operation, the 5 pins are used.It has 1 functions.Maximum output current falls to 500mA when operation criteria are met.Supply voltages of 5V allow for high efficiency.Currently, the LED driving board has a resistance of 80mOhm ohms.To maintain a normal operation, the supply voltage (Vsup) must be maintained above 2V.
RT9702GB Features
Supplied from 5V
Resistance of 80mOhm
RT9702GB Applications
There are a lot of Richtek USA Inc. RT9702GB Power Switches ICs applications.
- Portable GPS
- Portable Music Players
- Portable GPS Device
- Hard Disk Drives
- PC Card Hot Swap
- Various applications equipped with buttons
- Notebook PC
- Wireless/Networking Cards
- Storage (HDDs, SSDs)
- Wireless Modem Data Cards
